print heads

Hey we have been using the HP Latex 800 and are planning to upgrade to the Canon Colorado 1650, one of our concerns is the price of the print heads. If anyone has changed the print heads recently kindly let us know the price.

Hey don't see a group for the Oce or I just overlooked it. We are moving things around and I know we shouldn't move the Oce Colorado 1650 without locking down the heads. Does anyone know how to do so? Pictures? Video link?

Hello, I'm Greg. I'm new here and I hope I'm posting in the right place. I'm trying to start up a new business. I came across what I thought was a good deal on a second-hand printer (Epson SureColor S50675). The guy who sold it to me told me said it would need some maintenance, possibly...

Hi Folks, I've had two cyan/ltcyan heads spit the dummy in a couple of months - nothing appeared wrong, but the L25500 was convinced they were no good, so I changed them both. The printer was happy, but the 2 new C/LC heads were constantly printing bandings getting lighter. Head cleans and...

I'm having trouble centering the print heads and cap tops of my Roland SP-540V. How can I tell the caps are centered? It took me so many times to get the heads centered but now I think my caps aren't centered because the bottom portion of one of the heads is not being cleaned. I see how to...

We are experiencing a very frustrating color change. Printer HP 360 Media Dreamscape Mystical 16 pass See attachment We are at a loss to explain this. The file has been checked for clips, hidden boxes etc, but there is nothing there......If anyone can help, I would be grateful..

Hello, Does anyone know of a way that you can clean old print heads after they've been replaced and the old ones have been sitting out for a bit? we got all new print heads and now the old ones have dried but id like to try and salvage them. Any suggestions ? or know of anyone who does this ...

Im going to try and not be so wordy but very descriptive: I have an XC540 ProIII - My problem started when running a test pattern. The Black head was missing a full side, I ran a few medium cleans and no luck getting the head to fire. I dismantled the machine to check the dampers and the...

I Need HELP with the Print Head Manifold on the JV3 - the Black Thingy that attaches on top of the Print Head and allows the Attachment of the Dampers/Ink Lines. (JV THREE - Not the three three) The little plastic "Extension or Shaft", for lack of a technical name, had Snapped Off ( I had to...

Hello! We have an interesting situation with our printheads and this might have been answered somewhere in these forum. I saw already a similar problem but not exactly the same and wonder if anyone has experienced this exact situation. The Cyan, Magenta and Light-Cyan printheads are creating 2...

I've run into a problem I haven't encountered before, and not sure what the issue is. The Cyan head seems to be producing a lot of overspray, and the alignment of the Black nozzles seems to be out of whack. I've attached a few photos, any feedback would be helpful. I've had to learn this...

Hello, i have a problem with my printhead cyan, i have change my 2 cyan damper and always the same ! HELP ME !

Hello, I work on Bonaire, Dutch Caribbean I have A Versacamm sp540v firmware 6.60 I have the service Manual and there is no Roland technician on the Island or available in a near location. I need to change the print head but I can not enter the service mode, Is there anyone that can help me...

I have had problems for 2 years with the black output on my Roland SC545-EX. Here's the scenario: I start printing a banner with full bleed black, it starts fine but after a couple of feet a slight over spray starts, it eventually gets worse, then the print starts to go bad, I can see that not...

My Spitfire 65 prints a very nice and rich test print (i have a new heads) but when i start to print from RIP i have a problem with blured edges. cyan and magenta are divide in two. double edges of cyan and magenta. Can you help me?