signs

I'm making aluminum signs (decal on aluminum blanks) with round corners. I'd like to get an edge on them to finish it off. Can anyone recommend a good option for a rubber edging that I can wrap around the edge of the sign and give it a finished look? Signs are used in the carwash biz and need...

Hello all. Kinda new to this forum. I have a small shop in North Florida, (Jennings) and have done sign work since Jr. High School. Since I was born in 1952, I've done a lot of signs since then. I mostly do vinyl graphics, but do some hand painting and other types as business calls for. Just...

Most of my signs are signs on posts and the edge isn't all that important. I sand it with 320 grit paper to get it as smooth as possible. Roll a coat of primer to help fill and get it a little smoother again. Then I throw on a couple of coats of paint. It's fine, but not great. I'm looking...

Could anyone recommend a company we could have these frames made for us to insert the signs into?

The purpose of Signs 101 is to provide a venue and resources for individuals engaged in or interested in engaging in the craft, business and profession of sign making as a way to earn their living ... in full or in part. Conversely, Signs 101 is not here and is opposed to providing those same...

Hello everyone, I've been out of the signmaking racket for quite a while...so long in fact my signmaking program was Anagraph with an 15" plotter I think. I'd like to get back into signs again and would like some advice on a simple program and inexpensive plotter. I just want to have a good...

I have been making small signs and signs people install themselves for a couple of years. From this thread here: http://www.signs101.com/forums/showthread.php?134884-What-do-you-think-this-is-worth-In-your-area How many of you would install your own: dig holes, concrete, post, etc.? If you...

2 Mutoh Falcoln II 64" Outdoor Sign Printers - $1995 (Palmer, PA)image 1 of 7 condition: fair make / manufacturer: Mutoh model name / number: Falcon II 64" Outdoor Printers size / dimensions: 121"w x 36" d x 48" h Mutoh Falcon II 64" Outdoor Sign Printers We have two Mutoh...

I have just recently did a few exterior Backlit signs for our company and the signs look yellowed when lit up at night. It is just cut vinyl on white 7328 Acrylic sheets, and a couple of them were done using P95 for a separate sign. Here is the kicker, On the first set, there a is large panel at...

Looking for established trade only sign company with installation and license. Currently have a double sided digital screen pylon that needs to be quoted. We are a non electrical digital sign and print shop. Great opportunity for both! Please reply to me in private message. Thank you,

Visit http://conta.cc/1M6lLpy to see the entire newsletter!

I am in need of real slate chalk boards without the frame for my customer,Can anyone reffer me of a good wholesale shop? Thanks, Amber

I have worked with Micky and his teat at Sign Team Inc. since 2009, when I lost everything in a tragic flood of my entire city of Cedar Rapids Iowa in 2008, I lost all my equipment including my digital printers, due to the fact insurance wouldn't cover my equipment it put me under until 2009...

Hello all, I've been making some signs and banners and I have a customer who would like it on Alumilite instead of coroplast. I've looked on Fellers and others, but I cannot seem to find it. Is this not a standard, heavy duty, board? Thanks for any info! Bryce

Transco 20amp Disconnect Toggle Switches for electric sign applications

GraphixCALC Pro Sign Estimate software is in the next stage of production. We are very excited and believe those looking for an accurate, flexible and powerful sign estimator will love the look and feel.

Bonnet design for 353 Dan Buckleys hearse, prepped for the 2014 banger racing World Final. Paint n airbrush

Hello i have a sign to do for a customer that wants a navy aluminum sign. I can get a white base and other blue bases but im trying figure out what is the best way to do it i.e. Wrap it with navy vehicle wrap or buy the paint for aluminum? Any one done this before? thank you

inkDOTS Printing Solutions was started in our garage in 2006. We love the Large Format printing business. We knew nothing about it when we got in and have learned as we have grown. In the 8 years we have been in business we have changed our business model 3 time in a attempt to keep up with the...

I created a template out of foam core that is saving me so much time on job sites I wanted to share it with everyone here. https://www.youtube.com/watch?v=xWRplaoemoI Here is a link with more information...