back slitting paper backing

[MichaelAlmand]

Hey Guys is there a tool I can buy that back splits the backing paper for decals. I am printing a bunch of decals and they want the backing split for easier application. Any help would be greatly appreciated.

Thank you
Mike

 

[The Big Squeegee]

You can use the tool holder from a plotter for this. Some people use a box knife but that is pretty touchy. There are other creative things you can do. It will depend on the volume that you want to do.

If you have a lot to do, it is best to order them slit from stouse.com

 

[ThinkRight]

I have thought about that my self.

 

[Fred Weiss]

The correct term is semi-slitting. If you do a lot of it, a Champion Semi-Slitter may be worth a look.

 

[SightLine]

Also for low volume Olfa now has a knife out specifically for this sort of use - the TS-1. We got one from http://store.cadenceinc.com/ProductCatalog/TS-1

Works pretty well but I would not want to use it for making a big order of "crack and peel" type decals. We use it for in house stuff.

 

[signage]

If you are using Omega 3.0 or later it can be done with you plotter!

 

[GB2]

This is what you are asking for:

http://www.densitometers.net/content/akukut.asp

 

[JERHEMI]

This is what you are asking for:

http://www.densitometers.net/content/akukut.asp

I have one of these. Whether it makes a perfect slice is all about technique and the angle you drag it across the back of the decal. Kind of a pain in the butt to be consistent though for quantites of decals. It's about the size of a Zippo lighter, probably a little smaller. It's awkward and you have to hold it with your thumb and your index finger and drag it almost like you hold a knife as you cut a steak. Does it work? Yes. Is it the perfect solution? No. Do I recommend it? Sure.