• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Help with printing issue

Mary Gotcher

New Member
Two problems, I have some overspray and lines in print. What can you do about overspray? Also, lines between the print is driving me crazy. I've cleaned and cleaned and cleaned. Any suggestions?:cool:
 

Attachments

  • print issue.jpg
    print issue.jpg
    50.9 KB · Views: 98

Mike Paul

Super Active Member
A little overspray is usually banner fuzz on the head but that doesn't look like your problem.
Try cleaning the encoder strip.
 

Mary Gotcher

New Member
That's what I thought, so I've cleaned round the heads using a sponge swab. Printing at 720 x 720. Tried 720 x 1440, same thing.
 

Jackpine

New Member
Could you post a nozzle check and a test print of color blocks at 72x720 bidirectional? It could help.
 

MacDaddy

New Member
Nozzle Check Please. Most likely you have some mis-directed nozzles, at least I hope this is all there is to this... A Check Nozzle Pattern will tell the tell...
 
Top