• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Ideas for a 54" Vinyl cutter

LittleSnakey

New Member
We just bought a Graphtec FC-8000 and its very tempermental.
We design and print with Flexi 8.6 to a VP540. Most things are laminated so the cutter must be able to read crop marks and align cutter

Cutter must also be 52-54" wide.
 

Flame

New Member
54" FC8000 is a top notch plotter, beyond a shadow of a doubt. Sure there are some other nice ones, but that plotter should be able to handle most any sign project you throw at it for the next 10 years.
 

briankb

Premium Subscriber
I would thicken the crop marks and make them a little longer. I use the Illustrator plugin and it's fairly simple. I'm not sure how to do it in Flexi.
 

smdgrfx

New Member
I have a Mimaki, FC8000 setup. I only have problems with the crop marks when I'm cutting through Pro-Shield laminate. Otherwise, it works great. I'm using the cutting master software that came with it because I haven't upgraded my Flexi.
 

amw

Longtime Members
We have no trouble with ours either.
We use cutting master2 on the FC8000 and print on a SP using versaworks.

Maybe its the type of crop marks your using?
 
Top