• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Is this an alignment issue?

Forty One

New Member
Printing braille on the ujf, and as I am building up layers (overprint x9) I'm getting this ghosting/overspray.
Is this cause to check the alignment of the heads?

PXL_20220806_013625044.jpg
 

Forty One

New Member
3042 fx
I've adjusted the bed for the thickness of the media and head height is 1.5mm
I'm trying a differnt option to adjust the height of the table half way through the layers to assit in maintaining the 1.5mm depth
 

johnnysigns

New Member
If it is alignment related, you can always check by running something unidirectional and see if the problem persists. If it's fuzzy in unidirectional, I'd think it would be static related. If it's clearer than I'd look at alignment.
 
Top