Discussion I've owned an HP R1000 since April 2019, ask me anything

[balstestrat]

thank you we have cycled the printer several times but no joy... so frustrating, its definitely to do with the second ethernet card which connects to the printer and its lost its IP address so wont connect.

You can set the IP again if that's the case. 172.22.22.21

 

[Ian]

You can set the IP again if that's the case. 172.22.22.21

thank you this is exactly what I needed

 

[Ian]

thank you this is exactly what I needed

the engineers even got it wrong FFS!! thank you so much its now written on the printer as it should have been!!

 

[mbasch]

thank you we have cycled the printer several times but no joy... so frustrating, its definitely to do with the second ethernet card which connects to the printer and its lost its IP address so wont connect.

We have had this issue twice now. Both times we tried recycling, leaving it down for 10 minutes and no luck. Both times we left in unplugged for several hours and when we started back up, the message cleared. Did you find any other solution?

 

[mbasch]

Anyone else having issues with ink no adhering well to Coro? Outdoors, it tend to start flaking in about a year. For handheld signs, we see ink coming off on peoples hands when they sweat.

 

[balstestrat]

Anyone else having issues with ink no adhering well to Coro? Outdoors, it tend to start flaking in about a year. For handheld signs, we see ink coming off on peoples hands when they sweat.

Got to say I have not heard about that. Curing it properly? I'd maybe consider different brand of coro.

 

[Neila Printing]

I will grab a picture of our profile once I get to the shop today, but from memory I know it's identical settings to our generic self adhesive vinyl (we use Briteline series from Grimco)

Did anyone end up finding good static cling settings for the r1000? Using briteline/general formulations white cling and having some issues