New connectivity issue - HELP!

[TopFliteGraphics]

My printer decided this week it want to be rebooted after each job otherwise the job stalls before starting to print. I have changed nothing in the past week but now if I run a connectivity test on the embedded server platform, I get the attached results. I am able to print one job at a time if I reboot the printer after each job. Talk about slowing things down...

FWIW - Running Flexi and have owned the printer for 6-1/2 years always running flexi.

 

[balstestrat]

Configure the DNS address like it says...

 

[TopFliteGraphics]

Configure the DNS address like it says...

The configuration is the same as it has always been. Why would it randomly need to be reconfigured?

 

[balstestrat]

Maybe your router is messed up, ISP made a change, Amazon cloud went down who knows?

 

[netsol]

power EVERYTHING OFF
BRING UP MODEM FIRST
then router
then printer & then pc

hopefully it all recovers without any changes

 

[Attila Nagy]

Do not need DNS to print. MSG me if need a quick help.

 

[netsol]

The configuration is the same as it has always been. Why would it randomly need to be reconfigured?

ISP changed subnet of enabled IPV6 & f**ked up IPV4
router decided on it's own to change ip?
i am a network consultant (40 years) and can give you a 3 page list of things that change ALL BY THEMSELVES FOR NO REASON
or it wouldn't be worth being a network consultant