• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Super Mario Bros.

401Graphics

401Graphics

New Member
One of the coolest projects we've done!
Super Mario Brothers Bedroom!

http://www.youtube.com/watch?v=Ap3GMXUNaj4

:rock-n-roll:

The window looks crappy due to the old double pane windows having a bad seal on them and moisture/calcium stains between the glass. I will probably redo the window by printing directly on matte lam. Currently the window is done with a solid layer of matte lam (to frost). then transparent light blue vinyl with the text and clouds cut out, then red oracal 8300 for the text with a solid black shadow.
 
TheSnowman

TheSnowman

New Member
My question is, what kind of plotter is that and how accurate is it going that fast? I have a mimaki that apparently sucks because I cut about 10X slower than that and it's still off by leaps and bounds at the end of a run that big.
 
xxaxx

xxaxx

New Member
kraigsnowden said:
My question is, what kind of plotter is that and how accurate is it going that fast? I have a mimaki that apparently sucks because I cut about 10X slower than that and it's still off by leaps and bounds at the end of a run that big.
Click to expand...

Wow time for a new plotter! if you can't run that fast accurately you are wasting a ton of time just waiting around.
 
TheSnowman

TheSnowman

New Member
No, it's not a bottleneck at all...it just isn't accurate at all if I run it past 10% full speed. It's like 8 years old. It's a CG-130FX
 
veloxgraphics

veloxgraphics

New Member
My friend wanted something in the back window of his car a few years back, so we did this Metroid diorama:
attachment.php
 

Attachments

  • cube.jpg
    cube.jpg
    153.2 KB · Views: 140
You must log in or register to reply here.
Top