-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Vinyl Roll Storage
- Thread starter AGinVT
- Start date
WB
New Member
I've been doing this for 20 yrs.. I've had racks on walls, racks on the floor, racks on wheels, racks that hold rolls horizontal bolted to the wall or on wheels or under tables.
Best thing I've ever done is build dividers attached to the wall, SO if the domino thing ever happened it was 6 rolls not 30 or 40. Even now, new shop rolls all on end on the plastic end caps and that's it.. Guess I don't learn?
Best thing I've ever done is build dividers attached to the wall, SO if the domino thing ever happened it was 6 rolls not 30 or 40. Even now, new shop rolls all on end on the plastic end caps and that's it.. Guess I don't learn?
Michael-Nola
I print things. It is very exciting.
I can confirm rolls certainly WILL oval if you use skinny pipe. Dense rolls on thin cores warp the worst (like styrene), but 150'+ rolls will all do it to a varying degree.
If you're stocking short/light cut vinyl rolls like a bunch of colors under 50' linear, then they won't warp. Not enough weight.
I have no idea why these companies sell a 1" pipe storage design for a 3" core. 1" does not equal 3"!
I cut my own racks, same design, but with rod notches for 3" pipe. Bought a bunch of junk 3" steel pipe and cut to size.
Tadaaa 3" cores stored on 3" pipe
All out of the way and off the floor. No warping.
If you're stocking short/light cut vinyl rolls like a bunch of colors under 50' linear, then they won't warp. Not enough weight.
I have no idea why these companies sell a 1" pipe storage design for a 3" core. 1" does not equal 3"!
I cut my own racks, same design, but with rod notches for 3" pipe. Bought a bunch of junk 3" steel pipe and cut to size.
Tadaaa 3" cores stored on 3" pipe
All out of the way and off the floor. No warping.F1225hgB42w
Guest
We've tried several storage systems over the years and the best way we have found is:
1) Pallet Racking for bulk storage of media (we tend to order pallets of popular vinyl such as 3M 40C and 3M SV480mc). Or even just two or three rolls of a specific product.
2) When not using popular media store it in it's box back on the pallet racking
3) Some media's we print rolls of almost daily, so we keep close the printers on these carts:
https://stock-and-roll.com/en/products/stock-and-roll-6-bobines
The reason we like these the best are they store 6 rolls of media without the possibility of toppling over if you bump them, they roll easily but can be locked to not roll, and they are circular so you never media stuck in the "middle" of other media like you will have with the mobile vinyl racks that were referenced earlier (if you have large rolls you need to access stored in the middle of the cart, it's a huge pain in the ass).
If you wanted to do something more stationary like jfiscus posted earlier with the rolls of media along the wall, I'd recommend the podium from Stock & Roll - as it provides the same concept but makes it easier to access media stored behind other medias.
https://stock-and-roll.com/en/collections/podium
Full Disclosure - I don't get anything from Stock and Roll, I have no affiliation with them and I have paid full price for everything I have ordered, I'm just a happy customer.
1) Pallet Racking for bulk storage of media (we tend to order pallets of popular vinyl such as 3M 40C and 3M SV480mc). Or even just two or three rolls of a specific product.
2) When not using popular media store it in it's box back on the pallet racking
3) Some media's we print rolls of almost daily, so we keep close the printers on these carts:
https://stock-and-roll.com/en/products/stock-and-roll-6-bobines
The reason we like these the best are they store 6 rolls of media without the possibility of toppling over if you bump them, they roll easily but can be locked to not roll, and they are circular so you never media stuck in the "middle" of other media like you will have with the mobile vinyl racks that were referenced earlier (if you have large rolls you need to access stored in the middle of the cart, it's a huge pain in the ass).
If you wanted to do something more stationary like jfiscus posted earlier with the rolls of media along the wall, I'd recommend the podium from Stock & Roll - as it provides the same concept but makes it easier to access media stored behind other medias.
https://stock-and-roll.com/en/collections/podium
While the product is expensive, the pricing typically includes (or at least it has when I ordered them before) shipping from France. If you contact support Marie will probably respond and mention Matthew from DSGI made the recommendations and she can help you find the right product (or products we've ordered before).Full Disclosure - I don't get anything from Stock and Roll, I have no affiliation with them and I have paid full price for everything I have ordered, I'm just a happy customer.
Has anyone seen this system around or know where to get it from?
JBurton
Signtologist
Let us know if you hear back.
Next best thing I found was from yellow tools. I'm a big fan of keeping rolls horizontal so I got a bull, which I hate because you have to unthread a rod from the rolls to unload them. Then I found this thing from yellotools, and while I don't have one, I'm figuring on building one since things are slowing down a touch.
Treemaxx EasyReach | mobiles Regal für Folienrollen
Lagerungssystem zur einfachen Handhabung von Folienrollen Schwere Folien sind nicht einfach zu bewegen - vor allem dann, wenn man alleine ist. Wir haben den Treemaxx EasyReach so entwickelt, dass Folienrollen auch von nur einer...
www.yellotools.com
Jumpshoutmedia
New Member
Has anyone figured out where to buy those Donat Vario Clip things from!? It's such an interesting system, and there doesn't seems to be ANY info about them online anywhere, except for a couple Youtube shorts that just show how they work.. no info about them.. where to get them.. who actually makes them.. etc!
I'm super curious! It has me considering trying to design and 3D print something similar if they can't be purchased!
I'm super curious! It has me considering trying to design and 3D print something similar if they can't be purchased!
I reached out to this site that carries it https://www.groener-schulze.com/wer...wandregal?clk=Breite&form_clk=0&Breite=172+cm
They wanted for the 172cm wall mount about €1200 for the unit plus €175 packaging and 800 for shipping to the US that's about $2500. I would love such a unit but not for that price
They wanted for the 172cm wall mount about €1200 for the unit plus €175 packaging and 800 for shipping to the US that's about $2500. I would love such a unit but not for that price
weyandsign
New Member
You would love this trash? Here make one yourself, but don't use plastic brackets like the fancy expensive german ones: