Recent content by Alex C

I've swap with another mainboard.. The printer power on. Yes, same model. Great, feeling more confident now.. Thanks

Hello, the mainboard on my Sp-540v wont power on the printer.. Problem happens after power cut. I've tried another mainboard (from another printer), it starts Yippie.. Can i retrieve the parameters from the dead mainboard? The green led on the mainboard is ON - Green Led on Carriage board...

Hi Haus, underneath (Bottom of) the print head is clean, like no ink splattering. The wiper is working fine. I have made a test yesterday, where i've moved the carriage at the maintenance bay and turn the printer off for 20mins and observe the print head. After 20 mins obesrvations...

Hi, Air purge have been done. Cyan good Magenta good Yellow tiny air bubbles in ink Black no ink at all only air. Sub tank levels -- High -- for all four colors. Yours, D

Hello, Unable to get get access to Air Purge directly, need to got through a Head Wash first.. Yours Desire C

Hi there, Since last week, I have been facing an issue with UCJV 150-160 where black unwanted lines is been mixing with yellow color. Cap adjustment done - Negative & Positive pressure checked and within range - wiper good - waste pump looks to be working fine - cap absorber new...

Hello guys, Vs-640i 7 colors, is printing gradient - Shadows and some other colors with a magenta tint.. Using Versa 6, tried different profiles same problem. See attach pictures. Flex cables have been cleaned - Dampers and Captop replaced - Head alignment checked and no anomalies found. When...

Hi team, Have anyone encountered similar issue on long run print outs? Above 1mt50 the color changes. we are talking about a Vs-64o 6 colors using Genuine Roland Inks with a 2 months old captop. Any idea?

Hi Balstestrat, You are right calibration need to be fine tuned. 2ndly, I've ask several person and had the same answer. the cyan on the left looks like fading. The original file is more than 2metres long with full background, this is where we notice the change in...

Hi Team, Hope you are doing fine. Need help, dealing with a Vs-640 6 color eco max ink. The color at the start of print is not the same at the end of the print. The printer uses CMYKLcLm versaworks 5.5.1 version Firmware 5.10 Notice that the Cyan test on the left is not the same as the...

Got it, I'm replying to myself So the error code 0022 contains 0002 FEED motor error and 0020 SCAN motor error occur in order.. Will try a new FM3 Servo board.. thanks for your help..

Hi everybody, Has anyone come across " Feed Motor Error 0022" on a VG-640 running on TR2 inks? Strange that a feed motor gone bad.. I'm suspecting the FM3 servo board. Shall access the service mode and seek for a report.. Yours, Alex C

Hi Guys, thank you for information and advice. Opting to go for the serial connection. Do you have pinouts for roland DB9 to DB25 serial cable..

Hello NetSol, I've considered the option using the Serial Port. The main issue was: Lost connection problem, maybe it was badly configured or the serial to usb adapter is not compatible. The "Get from Machine' wont work..