Recent content by Eggleston

Just got it moved. Used a 26 ft truck with lift gate and it was extremely easy. Thanks for your advice guys.

Yes this is what I had in mind.

Thanks for your reply unclebun. I am hoping the truck with the lift gate will be big enough, the closest one is 30 minutes away and will be about $400 to rent. Would you advise against loading on a trailer if the lift gate isn't big enough?

Hi, I am moving and my new shop location is about 3 or 4 miles down the road. Not too far. I have never moved any of our large format printers before and want to seek advice from the members here on the best course of action when moving this thing. I am concerned that getting a box truck...

Getting this message and cannot do anything with the cutter. I'm guessing it has to do with the pinch roller sensor, but I have no idea how to go about fixing it. Just barely out of warranty and have things that I need to get printed and out the door quickly. Can anyone give me some insight with...

Getting this message and cannot do anything with the cutter. I'm guessing it has to do with the pinch roller sensor, but I have no idea how to go about fixing it. Just barely out of warranty and have things that I need to get printed and out the door quickly. Can anyone give me some insight...

Hi, I have been using our HP 335 Latex Print and Cut setup for a few months and really love it. I need help configuring a file to kiss cut vinyl and then come back with another pass and cut through around the outside of the file. I guess you could think of it like making a sticker sheet...

You can see that the contour is slightly off.

I was able to get it a little better, but it's still slightly off but now on the Y axis. One of the main things that seemed to have helped was to change the OPOS Media from 60 to 30. Any ideas on how to fix? I'll post a pic below.

I have had my machines for a few months and love them. However, I recently and getting unusable results with my Summa plotter being the issue. I’m using the hp barcode and the x axis is cutting about an eighth of an inch completely to the left. At first it was randomly doing this to some decals...

Did anyone ever fix this? My plotter is doing this as well.

Hi, I am very new to my HP 335 and am needing to print two different 2x6 banners vertically side by side so that I don't waste material. I haven't figured out how to do this yet because when I go to finishing tools it instead treats both designs as one single banner (grommets/fold lines aren't...

Thanks for your reply. Yes I knew that the absence of white ink is a big issue. I thought about trying one of the hp media profiles but was worried about screwing something up.

I am a new owner of an HP 335 print and cut. We are printing black text on clear Orajet 3620 and there was not a built in profile in HP's database. I chose Orajet 3640g as the profile as it seemed like a close match. After printing it appears that the black is translucent and not very opaque...

Yes, we have the HP 335 Which is a 64 inch printer. I will see what the price difference is.