• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by Ma_____

  1.

    jfx200 error

    Check power supplay (Confirm 36V & 5V on Main PCB), check reconnect cables, check fuse.

  2. JV33 ink cart configuration

    And du not forget! Change the coupler when switching between 4/6 (+white) colors.

  3. Can you speed up UCJV300 where there is no data?

    Find opcion "SPACE FEED MODE" .

  4. Changing JV33 motherboard head cleaning problem

    Parameters mast hav person (servis) who was install printer. If they not mast ask mimaki ( only authorized servis)

  5. Changing JV33 motherboard head cleaning problem

    Did you put back parameters from old motherboard?

  6. Need Help Mimaki CJV 150-75 , error 52a Lenc count HDC

    check encoder sensor , for dirty, position.

  7. UJF 7151 dimensions.

    When unpacked Main unit; 2198 (W) x 1099 (D) x 926 (H) mm Table; 1079 (W) x 971 (D) x 226 (H) mm

  8. Mimaki UJF-6042 MkII Braille printing with Rasterlink 7 & Illustrator 2023

    What ink are you using? Illustrator plugin for Braille work only with LH100 ink.

  9. Mimaki ID-cut - Kiss cut + Die cut

    ID barcode works in combination: Mimaki printer + RasterLink + Mimaki cutter. You send the print-rez image through RL (with the ID barcode included) to the printer. When it reads the ID code, it draws the cutting lines automatically. In FineCut, different cutting settings can be defined in...

  10. Need Help Mimaki JV100 driver and RL7 issue

    Uninstall driver and RL. and fresh install. You must have at least one jv100 profile installed in RL.

  11. MIMAKI INKS

    BS3 hard solvent , strong odor, cmyk, cheap BS4 midl solvent, smal odor, cmyk , cheap ss21 midl solvent, exclusiv mimaki ink,

  12. NEED HELP CJV150 ES3 ICC PROFILES

    You can use profiles for other ink types in RasterLink. eg ES3 profile can be used with ss21 ink. You will need to check that the colors match. In RasterLink, there is an option to print an image from several profiles and check which one fits best.
  13.

    Need Help JFX200 White Ink Alignment Issues

    Slant and stegger calibration should be done. Physical head position adjustment.
  14.

    another UJF & Rasterlink question.

    In RL Tool->ColorCollection, add a new Collection, add a new color (Spot:Ink) and name it eg "MyColorABC" and mark the new collection. Create spot color "MyColorABC" in AI and color your design. When the image is inserted into RL, the color will be changed automatically.
  15.

    Mimaki JFX200-2513 Weird Cyan

    Check MAPS setting auto/manual. Manual settings smoth (mor beter) and speed (less beter).
See more
Top