Recent content by ozpall

so replace it even thou other jobs are coming out fine now? thanks for the replies!

Hello Everyone, just wondering if any HP users have had this problem or could tell me what is it related to. the machine is under warranty but just wanted to pick you guys/gals brains. I ran 3 banners 13oz, the first 2 came out fine no issues but the 3rd one as you can see something happened...

i get something like it if the media profile i select doesn't like the type of vinyl i use. usually with gloss poster paper if i select HP Photo paper it does something similar.

ad a board on each side to make the 48" wider?

yeah i had a customer in December in chicago that wanted me to install vinyl on his windows, i told him it was too cold but he insisted that i use a heat gun to warm up the glass, i told him no thank you. besides its too cold for the vinyl it will eventually fail.

can you show us a sample of the graphics you are installing? can you use regular color cut vinyl? that would be the best for cut letters and you would install wet and use transfer tape. I don't install under 40*

any shops around Chicago that can print white ink on black sintra and router with quick turn arounds? if so please let me know thanks!

no unfortunately that is not an option since they already have vinyl installed they want to stick to the same.

so the stuff they currently have there is window cling material, and it literally its falling apart just by looking at it, they had that stuff there for years, the picture shows a home and the tv is the old school big boxie tv.

hey thanks a lot fellas much appreciated!

yes i think I'm going this route. i do have a laminator. if job gets approved i will contact you for pricing on the WindowTac for sure. thank you for the reply!!!

found my answer! https://www.signs101.com/threads/material-for-full-window-decals-installed-inside-facing-out.155791/

Hello Everyone, I have a customer that wants me to replace the graphics they currently have, (pic attached for ref) what's there right now feels like a window cling mounted on the inside of the windows, not sure how long its been there as its falling to pieces if you touch it. so my question is...

correct, import the jobs again. and also have this autorotate selected as well.

Ok, figured it out, you don't need to create a new quick set, attached is a pic of where to find the setting for the autorotate. hope it helps others.