I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
I have never bid a transit ad campaign before. I am curious as to what ballpark pricing everyone us using on installed (directly on bus) iJ36-20 or Busmark 5800. I surely do not want to low ball a price so what does everyone think is a fair price per Sq/ft?
Thanks!
JD
I have a box truck wrap I need to complete in Naples FL. I was wondering everyones thoughts on using cal vinyl for this like 40C, 48C, or 2105. It is a Uhaul type moving truck with the large white plastic rivets (pic) that I am not going to wrap but relief cut around and leave them exposed...
Yes, I already checked that. Made sure they were identical with no success. I even changed the IP address on the Roland and then matched In Flexi and Versaworks will no success. its strange.
I just purchased a new router for my network and now my Roland Versacamm will not connect to the computer. My HP L26500 was able to re-connect to the new network but I cannot get the Roland to connect through Versaworks or Flexi Production Manager.
Has anyone ever ran into an issue like this...
Is anyone aware of a tool that will make a relief cut around Torx screws? Fellers sells the Rollepro Precision Rivet Cutter (pic below) but im not sure if it will work on Torx screws? I saw the Justin Pate video relating to these screws and he used a smaller tool that was a circular disk...
I don't believe I did. I'm new to flexi and have only used versaworks. I'm still trying to figure out my profiling on the new machine etc so pretty much a newb rookie on flexi.
I just purchased a used L26500 and so far I'm impressed coming from only using Roland machines. I love the print quality etc. I just printed a large 30x8 wall wrap using phototex and my panels are all slightly off. I flipped every other panel in flexi but I'd say each panel is 1/8 to 1/4...
I am new to flexi and I am trying to print a 346" x 98" wall wrap. I want to tile it into 6 vertical panels using Flexi Production Manager. When I input the desired size and go to the tiling tab the program wont let me make vertical only tiles. It is defaulting itself into two long horizontal...
Thanks for the info. I am planning on using Flexi subscription plan actually as I have only used Versaworks RIP prior to this and would like the option to try Flexi for a month or two before committing to purchasing a RIP like ONYX. I would only be running cast material through the HP so would...
I am looking to potentially purchase a L26500 tomorrow as a second machine. I do the majority of my business in wall and vehicle wraps. This would potentially become my main go to printer for these jobs. Does anyone have and good or bad experiences with this machine? Color shift problems...
I am looking to add an HP 260 Latex printer to my shop in addition to my Roland VersaCamm Vp-540i. The majority of my business comes from wall wraps as well as vehicle wraps/fleet. I want to add the latex machine for faster turnaround. Has anyone had any good/bad experiences using the HP...
I considered Arlon 8000 but this is going into a hospital who is going through a remodel in their lobby. They will undoubtedly want to update this in a year or two so I decided against something that would be a pain to remove. I decided upon using Avery 1005 EZ RS with the 1080 matte overlaminate.
So I took a scrap I had of Avery 1005 EZ RS laminated with 1360 and decided to test it on a block wall in my basement. Used high heat and a rollepro and its been on there for 24+ hrs. Pretty impressed with the adhesion. It hasn't lifted up anywhere and the corners are down firm. I know it...
So i am going to be doing a floor to ceiling wrap on the inside of the elevator (photo below) with a matte laminate. It is not a local job so I would prefer to not run into any edge curl or issues that I would have to travel back to fix. With this flat faux wood paneling would a high end...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.