Recent content by veloxgraphics

I also posted looking for old flexi... decaldude1137 can you DM me what you want for a dongle?

Still looking for a legit licensed version of Flexi, with dongle!

Compatibility with Gerber Edge is a must, Flexi preferred (but will learn Omega if that's what's available) Thanks!

Ran through service manual procedures for adjusting tool height and pressure... no change. I've taken a short video of the tool travel as i press the test cut button during the procedure. https://www.youtube.com/watch?v=uXSeElBxHz0 I know we're not supposed to link to offsite photos on...

Also, not sure why i put VP540... this is my XC540

bob - thanks for the tip. I just blew it out per your suggestion and am fairly certain it's clean now... cranked the pressure to 300gf and it's still not touching the vinyl during a test cut. There's a pot on the cut carriage board that could be adjusted... if no other suggestions are...

As of this morning, my cutter does not drop the blade enough to even touch the vinyl. I thought maybe the electromagnet was getting too weak to counter the spring, so I upped the downforce... to no avail. The service menu does not seem to have any blade travel adjustments. Any direction /...

I would have replied with, "Well, they ARE actually only $5... plus points, plus closing costs, plus escrow fees, plus..." See how far you got before they stopped you. :)

My friend wanted something in the back window of his car a few years back, so we did this Metroid diorama:

+1 for the encoder strip. If the nozzles on the print head fire ok everywhere but in that one spot, then it's not the print head.

Obviously you'd have to do it in sections, not the entire length at once... but looking at your layout the URL seems to be the longest... guessing around 100" give or take. If you're using a Roland that will suck (i use a roland :banghead:) so i see your desire to not unload media, lam, and...

Judging by the file attached by the OP showing what the tanker is hauling in english... it's hauling food industry waste... grease trap gibblits and what-not

It's on their ftp server... i useta have a username/password but it no longer works. Im sure someone can help ya get it. ftp.rolanddga.com

This is how I work 100% of the time. I dont want my flexi/rip machine on the internet so i've disallowed external routing to it and work via fullscreen RDP. Keep in mind, im doing mostly spot color work so no biggie... not sure what this would do to your raster color profiling.

Also, if your media is wandering... might check to ensure your pinch rollers are still good. They are shaped to pull the media outward... if one is buggered then the other will start pulling your media off-track