Search results

Hello, we have a new printer installed and i dont feel the wiper height is correct and need to access the #adjust menu, can someone tell me how?

So we had to replace a couple heads on our jf 1631. We replaced #2 turned on the machine everything was fine, then I replaced #4 and turned it back on and we got a error 108 hd thermos 7. So I replaced the fpc to print head 7 and then we got the error 108 connect 7 message. We don't even use...

Hey everyone. Seeking some guidance on a new issue this morning with our JF1631. We recently replaced the y axis motor and are having some issues with alignment on the cap and wiper. I do have the plastic cap alignment tool but the issue I am dealing with is I cannot get the head to align to...

Looking for mimaki tech in the midwest to service jfx200

We have two fairly new mimaki jfx200 2531 and run rasterlink 6 on both and all of the sudden one of them is not printing a gradient the correct or normal way. I have attached images and seeking some help. Bear in ming these are the exact same files and both printers are ran with independent...

Hey everyone, Just curious where everyone is getting their products to laser engrave at the best prices, Glassware Leather toilet bags flasks knives well about anything?

Hello everyone, This is something I should have asked some time ago but we print on aluminum .040, .063 in various shapes and print full bleed. We are looking for the best solution, currently we have older flatbeds that we print our layout on the table and then just align all of our blanks and...

I see a few posts about water tank route errors. Any solution on this as we have to use a blow dryer to increase the water temperature at every startup. Was doing it on 1 of our machines. Now two of them. We have to use the blow dryer during the power on maintenance count down every time...

I replaced rubber caps and one damper and now I have tried to restart 4 times. There is normally a power on maintenance countdown. Right now on my first restart it started at 1, jumped to 12, then went up to 13 and stopped. Then powered down and unplugged and this time it showed 1 real quick...

Hello, I recevied some pink RV antifreeze when I bought a used jf 1631 mimaki and I was just wondering. Anyone use a substitute antifreeze, rather than the mimaki pink anti freeze before?

Hello I am searching for a mimaki JF 1631 Technician in the Midwest area. If anyone can offer advice on this matter or point me in the right direction.

Hello I am trying to print some grayscale images and there seems to be a cyan or oink drift left behind on all white areas of the image. What might cause this?

I am in the market for a "newer" used uv flatbed printer. We have 3 JF 1631 Mimaki and they are certainly beginning to show their age. We do like the Mimaki, but is their a faster flatbed with the same quality(and we don't need perfect for what we do)? We have heard good things about Anapura...

I have a JF 1631 flatbed and I printed a table and then went to print another table and the origin shifted back on me about a 1/4 inch. I have shut it down and restarted a few time, slid the gantry to different positions, unplugged the machine for a bit and every time I try to set the origin...

Hello for some reason we suddenly have a working disk C: issue and can only load one or two jobs at a time. What might cause this? Working disk C is at 94 % Physical memory is at 64% 3.9GB Any assistance would be appreciated

Hello, I recently had a head install on two different printers both jf 1631, the tech installed and said the head were aligned and they were not, so I paid him to come back and align them and he would not use the micro adjuster and I accepted his work and off he went and then ink began printing...

Do you know of any videos or how tos on how to use it. For miamki jf1631 head alignment with micro adjuster I have a tech here now and he is taking forever to dial in the colors and he print is slightly blurry and he is saying cant get it much better but I know last guy used this micro...

Mimaki JF 1631 has a 706 overheat issue. We have cleaned everything and still get it. It is not because the lamp is overheating…it is not even turning on. When I push remote and it is done cleaning it goes over to the left side and then come right back to the right side after a beep. The...

Cap Station getting hung up on right side and squeaking. The left side when facing appears to move up and down as normal but the right side seems to have resistance now and will squeak and not come all the way back up to seal the rubber caps the heads. Would love some advise on this please...

Hello considering a Mimaki JFX200-2513 and was wondering if anyone new of a good technician in the Midwest.