Search results

Have you dripped anything on the printhead, A faulty printhead will blow the fuses also

Thanks for post, I had always wondered if mine was working as it should, took it apart and it was full of lint/fuzz, I could barely feel the exhaust before , After the fact I can feel it a good 4 ft away, as you said about about a 30 min job, thanks mark

Thanks for input, I will probably go with the Supply 55 take up, thanks mark

Was wondering if anyone could give some thoughts on adding a takeup reel on our vp-540, Maybe some link to ones that work well and thoughts on one that don't work too well, Any input would be appreciated, thanks mark

Sometimes on ours we have that issue, It could be only one of the cartridges causing problem, but no matter which one we pulled it would still show not original ink, in order to figure out which one was causing problem we realized that if you can get into ink remaining menu the cartridge causing...

Thanks for info and links, I appreciate the input, mark

Looking for a reputable source for hardware and banners for some Main Street / Light Pole , Street Pole type banners, Hoped someone might have some recommendations on wholesale sources, thanks mark

Thanks for info artbot, I will give it a try, I was able to find a paper manual which explained replacing heads and etc, thanks mark

We have a 72uvr and 72uvx, the uvr runs good but needs head replaced, wanted to take heads out of uvx and put in the uvr, was wondering if any special service manual would be required to do this, I've replaced heads, boards and etc in my rolands and mutohs but don't have any experience with the...

Here is copy of Mutoh Bulletin relating to the tubing flush and draining of ink cartridges, It is for Falcon Outdoor II. Maybe it will help, thanks mark

Mutoh has a service bulletin that deals with this issue, exactly as Artbot described, There is a procedure Mutoh recommended to help clear the lines and prevent the draining of ink, My dealer told me on later models the pumps actually have a procedure to clear the drain lines after a cleaning...

Carriage cable caused me to get the error, first it was intermittent then quite regular, sometimes for a temporary fix you can take your finger and rub along where the cable lays, it will sometimes temporarily fix the problem, I replaced the cable, It was not that hard,

I always roll some extra out whether I am using a 10yd roll or a 50 yd roll, Its just a habit I have to try and avoid problems, You mention that the media hangs on thumbscrews, I assume you do have the media flange rollers to insert in your material before you put it on machine. I've attached a...

One way to help avoid a possible head strike , be sure to roll media out some off the roll , So the machine does not pull directly from the roll, but from the excess you have rolled out, mark

Thanks Just want to thank everyone for help, I finally figured out that the correct fuse was a 2 amp Fast Blo type fuse, Seems some Mutoh models use a 2 amp or 5 amp, My Falcon Outdoor II should have a 2 amp , I've attached some before and after pics of replaced fuses, I order fuses from...

Need some help finding correct fuse for my Falcon Outdoor II, Mutoh Part # MF-5012 My dist. called Mutoh and they said it was a 2 amp fuse, which they do not stock, Suggested I just use a generic replacement fuse, The people at GEI Wide format said it was a 5 amp fuse and they would have to...

Recently while installing new captops in my maintenance station, I broke the tabs off part which causes captops to lower, Hoping someone might have a old maintenance station with the part available, The only way I can get the part replaced is to buy new capping station at cost of $495 plus...