Search results

We have a customer who wants to apply decals to their new pallet racking system, decals are approx 3.5 x 18 inches in length, They have 2 areas on racking they want to apply decal, smooth 4 inch horizontal beam and also the upright beam which has holes/slots in it, their first thought was to...

All was fine until a couple of days ago, the linear bearing on print head carriage went out,I got a service call 101 error, so I replaced the bearing and it started back up without any error, But then the problems started, first it randomly was firing yellow printhead, then it started blowing...

Does anyone know if there is a difference between the 3 main cables that run the print head assembly, All 3 come from main board to print head carriage, Its hard to tell if there is different part numbers for cables or if they are identical, Just looking at them they look the same, but I get...

We have a VP540 Roland with bad linear bearing, Does anyone know an aftermarket part # that is suitable for this machine or should I use genuine roland parts, Motion Industries has the bearings but I can seem to find exact part number, any input would be appreciated, thanks mark

We have Roland VP-540 and use Flexi 8.1, When making long cuts or strips , the cutter feeds way too fast, I know the force/speed setting in flexi, but wondered if flexi has a setting to slow the feed in and out speed, When cutting a strip say 1 inch by 5 ft the machine just goes way too fast in...

On the overspray, If you have head height set to high you will sometimes get overspray around some areas, We have one and by mistake have left head to to high and there is noticeable different in quality of print, Just thought I might mention this,

We have customer who wants to mount a print to wall between 2 pieces of acrylic, What would be best media for the print? vinyl, photo paper etc, I have done smaller door plates before, But nothing this large, The print would be a photograph of building, they want to mount acylic to wall with...

Thanks for all input, I think the vhb tape will be way to go, I talked with my local glass guy and he said the glue would work fine, but it someone happened to hit one of the panels,I doubt it would ever happen but the glue is strong enough that it could possibly chip the glass when it came off...

We have customer who redesigned office space with pretty much all glass walls, Old offices had acrylic standoff panels mounted next to entry doors for identification, Are there possibilities of mounting something to the glass walls? We don't do much in this area, and hope someone might help with...

BluemoonATL and NateF were correct, these are made by United Industries the same people who make the foam board we use, I had no idea they had a separate website where they sell these pre made mounting blanks, thanks for everyones input, I appreciate the help, mark

We do some of the 1/2 foamboard for these same people ,But this piece they showed me is entirely different than foam board, I think they like it because its 3/4 inch thick and the edges are covered, It seems to be a styrene plastic or something with a white foam injected inside, then the edges...

We have customer who is replacing some 18x20 prints on interior of offices, original prints were framed and matted but they want something different, they showed me a mounting board I believe may have come from a Walmart print place, Its approx 3/4 inch thick, black color, made from light...

We use the material on our versacamm, Seems like it contour cuts better when all heat is turned off and platen is cool,

Thanks for all input, My thought is to sub out or just let the owner handle the initial painting, then work on letters,think on this its better to say no to the big paint part,,I really appreciate the time and knowledge everyone has taken to provide the input, I don't mind saying I don't know...

We have a job coming up to paint canopy of gas station, Its approx 5ft wide x 50 ft long , 3 sides, Its originally a light tan color, Original paint seems to be in good condition just faded and dull, Owner wants it painted Black with white text applied, letters will be approx 30 inches tall ...

We need to make some 6x14 inch printed rectangles for customer, They will be applied to new concrete floor, There is not much if any foot traffic, They are more concerned with adhesion than wear, Would normal calendered such as oracal 3651 adhere well, or are there other materials with more...

Thanks for input and suggestions, I will probably go with the gv vinyl ink,was hoping there might be alternative to the nazdar ink, I'm doing it in the shop so I will be the only one having to smell the fumes, dig out respirator and hope it drys fast, thanks mark

We have a school with a vinyl pad at end of gym, under basketball goal , The pad is made of upholstery vinyl attached to wall ,approx 6ft by 8ft, They want school name, mascot applied to vinyl, My first thought was nazdar vinyl ink but wondered if possibly one shot paint or etc might work, I had...

We have Napa store we're working on box truck wrap for, We were able to source everything but a hi res or vector of the blue barrel for Napa Know How, The store manager is having trouble contacting management for source file, Anyone have source for something like this? Any help would be...