Search results

It means you have taken your particular ink set and media and calibrated your machine, with your particular software, to lay down ink in a linear gradation from 0% to 100%. Rather than a non linear fashion such as a curve.

Do you see ink running through the two little drain lines that come off of your maintenance station while running a cleaning or a charge? Sounds like the maintenance station is clogged and or malfunctioning. Try running cleaning solution through the capping area and see if it runs through the...

-8 this morning, actual temp. One of my guys called me this morning to make sure we were open. Cleaning day for sure.

I've bought so much from him, I hope he has my tattoo on his shoulder. :ROFLMAO:

individual channel ink limits along with overall ink limit will dictate the ammount of ink put down. These factored together will tell you how much ink is being put down per overall size or square footage. Most software will include some sort of cost estimater that will get you real close to...

Ahhhhhhhhhh, take off eh?

what tye bulk ink system do you have? If it has the bottles on top you can pipe them direcly to the sub tank sylinoid and insert a dummy cartridge that has the card reader extended outside the machine and then remove the card like FatCat suggested. Violla.

It's the code that has to be entered when the print head is installed. It's like a code key per se.

To me it's worth the extra from a distributor who will stand behind the product. Whichever you do, make sure and get a proper head rank for installation. Good luck in your adventure.

If you remove the metal tray cover on the right side under the maintenance station you can see two small lines feeding into the large waste line that goes to the waste container, or a F manifold depending on the year of your printer. First make sure the large line to the bottle is clear...

Could it be static? I see problems with the cyan mostly when static issues show up this time of year.

Would it also then help to change the output icc to perceptual?

I use Epson canvas, but it's expensive but looks so great. I also offer a less expensive canvas product for banners. I've tried lots of brands, but Epson is the best for our situation for quality.

Kraft paper now, huge savings. Used to use Braper = expensive. We just use it to ship dark colored banners though.

What is the humidity level in your print area? I have seen this at our shop when the humidity drops below 40%. Also, blue seems to be the most prone to static issues.

:ROFLMAO: .........Unless you were serious, then,.........................:ROFLMAO::ROFLMAO:

We have on numerous ocasions donated materials for arts and crafts. Personalized placemats?

The old owner of our company, (strange fellow) had a company come by that was going to make flip flops out of them for third world countries. I myself like to use it for painting projects, not creative or worth selling, but there ya go. Maybe a big bullseye target for the range?

E068 on the 1204 is the carriage / head travel that doesn't match the encoder feed back to controller. Sensor, T-Fence, CR (Y) motor, drive belt, trailing cables that carry the signals, Main board, current draw on power supply. The maintenance / capping station is different than 1604s...

I am checking with a friend of mine who is a veteran Mutoh repair technician for any further advise, will post when I hear back from him. Don't light it on fire just yet.:banghead: