Search results

This is what I did, I put new head in cyan slot printed great so wasn't so sure about the swap on those cables so I put new head in magenta slot and digi head in cyan slot. Magenta printed great test print and black still half print, cyan and yellow still no print.Today started printer did test...

Already did data swap and have a new encoder sensor, don't have a loop but used magnifying glass to look at strip and looks like the sensor is putting a horizontal line on it. Yes running cmykx2 and was printing alright not perfect before I stated screwing around with strip

also replace battery in printer would that have anything to do with it. I get battery exchange every time I start printer and I already set the date and time

pull cyan from wast line, still no print

right now black and magenta printing real good on one side of the head, same place on each ever time, cyan and yellow not printing at all

Iam getting plenty of ink coming from pumps to the dump bottle on all heads, could it still be an vapor lock.

Ok... had printer printing about 85%..Just had banding in blue. Bought 4 heads from digiprint one new head was bad that had loose part rattling inside no luck getting it replaced ,so put old head back on, thats where I was getting the banding from.But the test print color bands were jumping...

bad test print Iam having the same problem. Could you tell me how you fix it.Its driving me nuts.Thank You ,HumpSigns

unrecoverable limit sensor Well I just put on new encoder strip and having the same problem...how did you fix it????Dead in the water with 26' box truck to wrap Thank You, Humphrey Signs

You don't think the encoder strip would have any thing to do with service call 0121. Thank You...

I have the cover back on know..would it b the small black one that screws into the cover like a ground or one of the white ones? Thank You, Humphrey Signs

yes.. I owned the roland sp300v for four & half years only had to up grade pump..now encoder strip....took front cover off to clean dust then it came up with service call 0121...thinking it might b encoder strip no reading right..getting one friday..but want to get head start on finding the...

roland sp300v 0121 service call having the same problem 0121. where are the thermistor located on sp300 printer humpsigns