Search results

Partial for a sports radio station we did last week.

I have a customer that wants an interior wall wrapped. It's painted block. Semi-smooth I would say. We've never attempted to wrap over block before. Any suggestions? Will IJ180 work? Any pointers or pitfalls I should be aware of? Thanks

Recently and sporadically the pen on the cutter has decided to stay in the down position, even while going from one cut point to the next(but not always). I can never predict when it will happen. It's driving me crazy. Now, after I select sheet when I insert vinyl, after it has read the distance...

In the middle of working on a file I get the unexpected/unknown. I save the file, reopen and this time when I click on an object in the file, Flexi just closes with no warning. Now when I try to open Flexi, it goes through the motions as if it were going to open, then nothing. Any ideas?

I have a customer that has a dual banner stand that has two single sided retractable banners. It is about 32" wide or so. I have looked it over for markings or a brand name and haven't had any luck. They are looking for a replacement piece. I am attaching pictures of the piece needed. Anyone...

Ok, I replaced the capping station, dampers & heads. I am losing nozzles exponentially. I have attached pics from a few nozzle checks that were done back to back. I've done several cleanings and even an ink fill. I did the reset home position after replacing the capping station, I checked all...

I have had to adjust this in the past because our 8ft banners etc were printing about 2 inches too short. I haven't done this in a while, but have noticed contour cutting errors on large pieces. I tried to adjust this today in the production manager, but after I reset it, it is still printing...

We recently replaced our maintenance station on our Falcon Outdoor. Since then, before we print, we have to use a syringe and pull ink through the waste lines because it appears that the heads are dry. This only works temporarily unless we are printing all day. Come in the next morning, and we...

I noticed about halfway through the day yesterday that my blues were looking odd. I did a nozzle check and the cyan is pure black. I have run aprrox 30 cleaning cycles and the black slowly became a dark navy blue. This morning however, it is black again. Any suggestions?

Has anyone tried the 6000XRP? I talked to an Arlon Rep at the show in Orlando. Sounds like a good product at a really good price.

Does anyone know of a contract source for the "hand fans" like you see for political campaigns?

Anyone recognize this as a font?

I noticed my colors have been off the past few days. So i did some ink test and seen the Lc is not printing. I took out the cartridge and realized it is bone dry, the printer never warned me it was running low or empty. I changed the cartridge, but still no Lc. What am I doing wrong, or is there...

OMG......we've been using oracal forever. Lately 3951ra. We just switched to the 180cV3 and 8518 ......this stuff is AMAZING compared to oracal . I may use the 3951ra for special applications, but from now on, I think the 180cV3 will be our daily use film. We felt like we had died and gone to...

When printing panels in flexi, should the overall print increase in size? For example, If I have a 200 inch print, and have 4 panels, I set a .5" overlap, should the print become 202"?

There is a text distort that I am trying to do, but can't seem how. Not sure what it is called, but the top(or bottom) of the text is straight, and bottom has an arch effect. Can this be done with Flexi 8.5?