Search results

Hi. I have had the same issue and to confirm....it is likely the carriage cutter ribbon cable...easy to change...

What are the symptoms that lead you to believe you need this replaced...or are you simply just looking for one?

Sign in china.com And Claraprint.com

where in western Canada are you located?

shoot me a contact phone number

If you are still having issues, I have several of these printers running everyday....and we do all our own maintenance.I would be happy to talk to you and run thru some ideas....

please have a look at the attached file

perhaps it is beacuse the machine has been in sleep mode and the ink Dryer has not turned on and the machine has not come up to proper operating temperatures. My machine looks just like your blurry print when the dryers are not on....once I wake the machine up and the ink dryer turns on and then...

have you had a response for a service manual?

I run several older SP-540V machines and used to have a similar problem. I started using a silicone lubricant and it cleared right up. I now make a practice of lubricating the bearings every 4 months and have not had a problem since. I place a small amount of this lubricant on the upper and...

that looks like the spring that goes at the end of the encoder strip....far left side.....

hello, I am in BC and ship all over Canada, I have several completely rebuilt SPV models for sale Sp-300V and Sp-540V. These are not the "i" model but thought I would reach out to you to see if you may be interested.. cheers

A few more details from your end would be helpful. Where are you located? what type of work will you be doing with this printer? Do you have any speed requirements for printing...the SP's are a bit slower but do a great job... Will you be doing your own maintenance or do you require a tech to...

also https://us.digiprint-supplies.com/en/vs-640-spring-cap-1000007551-pmero8116

try.... https://www.ebay.com/itm/Roland-Captop-Spring-Sits-Under-Captop-1000007551/112225039948

This machine is fairly easy to work on yourself...Tech rates can be between $100 and $200 per hour plus the travel time.A lot of people think that the older Sp-300, SP-300V and the Sp=540V are hard to find parts for...this is NOT the case and you can find any part for these printers! If you want...

Your welcome...glad it worked out for you.....make sure you add this to your bi-monthly maintenance schedule....at least cleaning the rail and re-greasing...If you have a dirty environment in your work space...you can do this more often cheers from Canada!!! eh!

That looks like a well used print head and really the only thing to do is to replace it if you want then best quality possible.

My experience with these print heads is they are very hard to fix to the point where they are usable for good quality work. I have spent time and money both with Ultrasonic Cleaners ( which you have to be very careful with as you can damage the heads further) and sending them to 3rd parties for...

If you are up for this you can try this......it is messy so lay some scrap hand towels down to limit the mess. You will need a spray can of brake cleaner with the red little straw that shoots it out..... Before attempting cleaning, switch off the sub power/power and wait until the heater and...