Search results

Since you seem to be the only person on the planet that is familiar with a rastek 652, may I ask you a question? We bought a demo H652 several years ago, and the rip was already set up on a computer so I didnt get any hands on setting it up. We since had a flood and lost that computer. I...

Nevermind, figured it out. Must have been a bad bearing in a wheel because after i replaced the roller wheel it went away.

Did you ever figure this out? My s160 is doing it and it does seem to be coming from the far right roller.

Ran into a really stupid problem, and wanted to post it here in case someone searches for this issue (as I found absolutely nothing in my searching) they have something to go off of. Anyway, summa one day just started cutting normally for most of the print and then randomly some part wasnt...

issue was that I was removing the layer of reg marks in illustrator before I sent to winplot. The reg marks need to be there along with the cut paths.

VDP needs to be done in in design or another program to make multi page pdfs. Caldera has nothing to do with anything, it just supports the files when you import them. I too though there was some caldera module I was missing but it end ups Caldera just has the ability to receive and print...

Yea we're hitting G7 standards.

Just had it fixed again. Changed out the head, and the dampers again. Changed out the cap top assembly too. I'll report back in 6 months!

Well if my decals went outside, it wouldnt be an issue. I profile for d50 and everything looks great in the sunlight, but I know my customers decals are going inside under who knows what kind of light. I can make it look grey under ****ty indoor light, but if you take that outside its green...

Yea, I end up having to make manual tweaks as well, and its fine, it works, but I feel like I shouldnt have to do that.

I do have light settings. D50, d70, incandescent, florescent, and I've tried those and nothing.

I've profiled plenty with Caldera. However my greys always end up looking like they have too much magenta in them. Anyone familiar enough with 9.2 to maybe suggest something I'm missing? Thanks!

Yea, i downloaded that an had no idea what i was doing. Thanks for the suggestion though.

We run Caldera and it takes care of all of our needs including profiling. However, we also have a rastek H652 uv flatbed printer, and caldera is not compatible with that. So for the UV printer we are using firey 4.5. Fiery has a built in linerization tool, but the profiling tool is an...

after i move the head over to lock the blade in the down position, how do i get the blade to pop back up into the up position?

I have an XC-540mt and its no longer cross cutting things deep enough. I've never changed the blade so I think its time for that. Can anyone provide me of a picture of the blade so I can confirm that this pile of blades on my desk is what is actually needed. Any kind of tutorial or walk...

I posted in this thread abuot 6 months ago that the same thing was happening to me. Well we had a tech come out, they replaced the head and put a filter on the black ink line. Its now happening again. Epson wont send out a regular tech of theirs to troubleshoot and instead wants to send the...

so we had the epson tech (or contracted tech) come out early december and replace the black head and put a filter on the black line. Everything was fine. IT is now just over 6 months later and the same exact issue. Black is starting to drop out and i assume its only going to get worse. They...

http://imgur.com/a/Svd3R Just wondering if anyone had a suggestion as to what may be wrong. If the head is fine after sitting for several hours, is it really a head issue? Also, I can replicate this every morning if I wanted to. Thanks!

Through the printer panel you can do a media feed calibration. But if caldera is just overwriting all panel settings when it prints do this: Go to the little wrench icon on the printer window in caldera. You will have three tabs at the top, printer, media, and status. On the media tab, you...