Search results

i have had 2 instances in the last week, where i get overspray printing on 3 mm white komatex with my mutoh vj1617h. i have never noticed this before but rarely print on a solid white background, so this would probably not show itself

i was given a sample to duplicate from a good client i took it to be gloss white polystyrene between 0.10-0.20 harbor doesn't have any gloss is it not made, or does harbor not keep it? is there a material i can substitute

yesterday i printed about 15 4'x6' 4mm coro sheets we cut them a few days previous, wiped them down with large alcohol wipes a couple times and printed all went fine this morning i am doing a handful of 4'x8' for the same customer. when i removed the first sheet from the cart, there was quite...

a good friend's daughter is getting married and wants to get some gift bags printed when we were looking at the mutoh hybrid i saw a fairly lengthy video that showed all the capabilities of this series machine one of the things it showed was printing shopping bags (like you would get at macy's...

having an issue with our mutoh vj1617h, we seem to fairly consistently have a takeup failure (?) when printing 3/16 paper faced foamcore see the picture, this always seems to happen at somewhere around the 2' to 3' point as material feeds it makes me suspect the conveyor tables i built (lifting...

our VJ1617h is getting cranky 4 new (last week) ink cartridges, just be 90% full after "shake all cartridges" prompt, error shows C ink low with constant beep, tried putting in old cartridge with some ink in it, changing smart card still prints fine, what am i looking at ink level flag?

we only print a couple days a week on our mutoh vj1617h, but i wet the captop daily & print a color wheel every day i notice lately that from time to time the ink will "pull back" and i will be missing a color (normally cyan or magenta) printhead, captop and dampers were new in january does...

wondering if anyone has one of these in their junk pile. started with a broken screw & someone who occasionally works with (for?) me didn't recognize what is beyond his abilities hoping to get a replacement part, so we don't have to get a welder to fill the hole

i am trying to do a couple seating charts for a good friend's daughter's wedding they sent a pdf (possibly done in illustrator?) fonts are not attached, (we can find them) so i allowed flexi to substitute arial, to see how the graphics print sending to my mutoh vj1617h, i get a rip error...

number 10,000 if you count aqueous & eco solvent it is a stubborn sob i am still a stranger to the mutoh hybrid does anyone have a better suggestion than adding isopropyl to the cleaner solution? (ecosol i would use acetone)

i have always been a skeptic and figure cleaning & a nozzle check every day is the only thing that keeps print heads in good condition i read the suggestions to flush all lines, etc and figure it is the next thing to freezing ted william's head, so he can be brought back, in the future i am...

i anticipate cutting A LOT of small printed numbers (1-5/8" squares) from polystyrene with drag knife IF I FABRICATE a small vacuum table 24" x 48" how do i size the vacuum pump to hold my sheets? i know when i look at the specs on a gerber sabre it seems like i could power the east coast with...

is there an easy way to bulk export a couple thousand pdf's as jpg's? i would like to have a good representation of our work, as a slideshow, on tablets.

everything is working fine, but, since the day we got it, the mutoh vj1617h makes an odd sound when advancing substrate (roll or rigid) obviously not a real problem, more of a curiosity, the sound has been described as sounding like i gave a 5 year old a Tuba

i certainly have a love/hate relationship with my new (to me) valuejet 1617h what a terrific printer! HOWEVER the way it goes through ink & cleaner, it would be cheaper if i got it to try cocaine in the last couple days there are 2 cleaning mode lights lit normal and long (i have to assume this...

we have a juki 563 sewing machine & although it is almost NEVER used (we make very few banners now) i would like that to change i would like to eliminate the bobbin for bottom thread feed & allow it to feed from another large thread spool anyone ever done anything like this?

i checked with our local roland supplier & the sheet cut blades for the sc545-ex come in a packagevof 25 for like $75. the one that is in the machine has been there for around 2 years & is not giving a clean cut. the $75 won't kill me (it may wound me a bit) but, i figure i will be about age 190...

not a business i no a lot about. other than sailrite, where do you go for awning materials?

our mutoh is running great. ARE WE ALLOWED with flexi 19 monthly subscription, to send to 2 printers simultaneously? i am asking about license restriction, i understand about memory and core requirements

doing a job with about 500 signs on heavy glossy photo paper I AM LEFT HANDED, so when i use the roto trimmer, i work from the other side than donald does. i am sure that is part of the problem, but, this type of trimming seems to be one of those things that I REALLY SUCK AT i am not cheap...