Search results

bob i really should have said, i was talking about my vj1617h i am printing generally 48 x 50 sheets of coro (or sintra, or fome core ) 2 inches compensates for the 2 inches that stays in the machine i have 6' conveyors with a guide so we go in straight i have a spacer i lay in place if i am...

Is captop properly aligned? does it look like it I making a good seal?

going back 25 years, the epson stylus pro 7600 came in 2 flavors, photo dye or ultrachrome the machine was "born" the same, but when you loaded your first set of starter cartidges, it flashed the firmware your ink choice was carved in stone you needed to replace one the circuit boards to...

mutoh, i think has you shake the new white cartridge for 5 minutes before installing yellow and orange (no matter whose) has as much or more solids than a black cartridge if you don't stay on top of this, the best you have to hope for is inconsistent color/density

are the dampers FULL? any air gaps in the lines?

just a guess, but, consider the possibility that you developed hairline cracks in the nipples on the manifold that the dampers sit on. replacement dx7 damper is not a terribly expensive part, BUT, you have to have a delicate touch. many people crack the manifolds when they change dampers. i...

i get tired of the syringe thing. (i get impatient) have you ever tried one of these...

this is the relative of a very important client. she has been described as being much like : "attila the hun, sacking a village"

it's funny, i have been repairing this kind of equipment as long as it existed. BUT in many ways i am still an amateur, i don't produce very much, (i get involved in too many other projects) what is the procedure to set an accurate origin point, so, if i print double sided on the mutoh hybrid...

A couple things to try CAREFULLY replace the oring under the nut on that damper solventinkjet always suggests cutting 1/4 inch of hose when changing the oring for best seal the manifold on top of the head is very fragile I would suspect that it has developed a hairline crack. you could remove...

a question for those of us who enjoyed physics class, exactly what does black reflective reflect?

That's the best way to ruin a good laminator. that and being careless with a razor knife

probably right.

it really doesn't take that long to cause a flat spot on the older, foam rollers.

we also have an OLD seal 400 with heat & a royal sovereign 65" but the daige is quite a trooper.

are you SURE there is not a flat spot? i have a 55 inch daige, that must be 25 years old. bought it used and the bottom rollers were TERRIBLE. i use it for nothing other than mounting to a substrate. i cheat and sandwich what i am laminating 10mm coro on the bottom, then my substrate, then the...

use a spray bottle, mist the substrate with alcohol. wipe with microfiber cloth flip substrate & repeat you say you bought a second laminator. the first was too small? you didn't have this issue with the first?

I got a dell optiplex from Amazon windows 11 pro 24h2 you can’t setup without internet 22h2 was not like that there are ways around it FOR NOW…

great!!

i have to setup a windows 11 pro pc later this evening i intend to create a microsoft account, the create login for "another user" local only give admin rights then delete the microsoft account