Search results

Hi Jim, I am interested, how much is Onyx?

iPrintStuff Thank you for responding and please forgive me but not as up to speed with the lingo as I should be. We use rasterlink 6+ on two printers and 6 on another. What is meant by spectrophotometer and what process? Sorry

Yes we are looking for someone that can color match 3-JFX200 together. We paid someone recently to make the color matches but in the end they are not putting down the proper colors. Do any of you have someone that you've worked with in the past that might be able to help?

Hello, we have a new printer installed and i dont feel the wiper height is correct and need to access the #adjust menu, can someone tell me how?

So we had to replace a couple heads on our jf 1631. We replaced #2 turned on the machine everything was fine, then I replaced #4 and turned it back on and we got a error 108 hd thermos 7. So I replaced the fpc to print head 7 and then we got the error 108 connect 7 message. We don't even use...

Any help on this would be appreciated? Why would the head keep going beyond the rubber caps after a print job and not just land over the rubber caps?

got the alignment dial in but now the head assembly goes beyond its normal stopping point and causes media jam after every print. I just cleaned the encoder strip and no luck Any thoughts would be appreciated

Hey everyone. Seeking some guidance on a new issue this morning with our JF1631. We recently replaced the y axis motor and are having some issues with alignment on the cap and wiper. I do have the plastic cap alignment tool but the issue I am dealing with is I cannot get the head to align to...

May need to have a print head replaced.

Looking for mimaki tech in the midwest to service jfx200

Everything is exactly the same. I am at a loss. Cannot figure this out. It seems like it must be a random update because both printers were printing the same file correctly. I did notice one computer rasterlink version is 5.16 and the one with the issue is version 5.15. So i will try an...

That was my first thought but not sure how to see if both rasterlinks are the same version

I am not sure can you advise as to where i might find that setting Solventinkjet?

The printers are in two areas of the shop and would prefer to print any job we have on any of our printers rather than picking a choosing.

We have two fairly new mimaki jfx200 2531 and run rasterlink 6 on both and all of the sudden one of them is not printing a gradient the correct or normal way. I have attached images and seeking some help. Bear in ming these are the exact same files and both printers are ran with independent...

Hey everyone, Just curious where everyone is getting their products to laser engrave at the best prices, Glassware Leather toilet bags flasks knives well about anything?

Hello everyone, This is something I should have asked some time ago but we print on aluminum .040, .063 in various shapes and print full bleed. We are looking for the best solution, currently we have older flatbeds that we print our layout on the table and then just align all of our blanks and...

I see a few posts about water tank route errors. Any solution on this as we have to use a blow dryer to increase the water temperature at every startup. Was doing it on 1 of our machines. Now two of them. We have to use the blow dryer during the power on maintenance count down every time...

I replaced rubber caps and one damper and now I have tried to restart 4 times. There is normally a power on maintenance countdown. Right now on my first restart it started at 1, jumped to 12, then went up to 13 and stopped. Then powered down and unplugged and this time it showed 1 real quick...

Tekkie1, I have had the same thing happen to another JF1631, do you by chance know which fuse or where it is located on the board? Also I was told by another tech it slider interconnect board assembly which is under the gantry on the left side, but you are saying over the heads on the right side.