Search results

Hello, I recevied some pink RV antifreeze when I bought a used jf 1631 mimaki and I was just wondering. Anyone use a substitute antifreeze, rather than the mimaki pink anti freeze before?

Thanks BlueMoon

I believe I called Chris in the past and he said he did not work on the UV 1631, am I mistaken?

Hello I am searching for a mimaki JF 1631 Technician in the Midwest area. If anyone can offer advice on this matter or point me in the right direction.

Hello I am trying to print some grayscale images and there seems to be a cyan or oink drift left behind on all white areas of the image. What might cause this?

I am in the market for a "newer" used uv flatbed printer. We have 3 JF 1631 Mimaki and they are certainly beginning to show their age. We do like the Mimaki, but is their a faster flatbed with the same quality(and we don't need perfect for what we do)? We have heard good things about Anapura...

I have a JF 1631 flatbed and I printed a table and then went to print another table and the origin shifted back on me about a 1/4 inch. I have shut it down and restarted a few time, slid the gantry to different positions, unplugged the machine for a bit and every time I try to set the origin...

Hello for some reason we suddenly have a working disk C: issue and can only load one or two jobs at a time. What might cause this? Working disk C is at 94 % Physical memory is at 64% 3.9GB Any assistance would be appreciated

Hello, I recently had a head install on two different printers both jf 1631, the tech installed and said the head were aligned and they were not, so I paid him to come back and align them and he would not use the micro adjuster and I accepted his work and off he went and then ink began printing...

Do you know of any videos or how tos on how to use it. For miamki jf1631 head alignment with micro adjuster I have a tech here now and he is taking forever to dial in the colors and he print is slightly blurry and he is saying cant get it much better but I know last guy used this micro...

Mimaki JF 1631 has a 706 overheat issue. We have cleaned everything and still get it. It is not because the lamp is overheating…it is not even turning on. When I push remote and it is done cleaning it goes over to the left side and then come right back to the right side after a beep. The...

Thanks Bluemoon, while I have dealt with the issue you are referring to it is not what my current issue is.

Cap Station getting hung up on right side and squeaking. The left side when facing appears to move up and down as normal but the right side seems to have resistance now and will squeak and not come all the way back up to seal the rubber caps the heads. Would love some advise on this please...

Hello considering a Mimaki JFX200-2513 and was wondering if anyone new of a good technician in the Midwest.

I think the mimaki jf1631 come with the bearings and the linear way together so I will be replacing them both. My question is has anyone every changed these? How difficult is it? Any advise? Jay

Actually I have found a ball bearing...so believe I have an issue. What part has the bearings that connects the print head assembly to the linear way rails?( Not sure that is the right terminology Jay

I am starting to hear a grind(with squeak) noise at the print head as is goes back and forth. Just appears to be metal rubbing metal is there a place to add grease on the supports that print head goes back and forth on? I may not be describing this well but the issue seems to be getting worse...

VanderJ you are both the winner and a life safer!! Let this be a lesson, the lever you were referring to actually had some of the paper label from the cartridge and it was the sticky side preventing the lever from moving. Thanks!!

Hello, ran into a first. My mimaki jf 1631 is showing me that my cyan ink level is near end and it does so on 3 brand new print cartridges that I have tried. I have never ran into this before. Last night I ran washing fluid through the head and let it soak overnight, when I can in this...

I am at a loss!!!! Hello I have 3 jf1631 printers and within the last month and half we have started having issues with print jobs just stopping right in the middle of the print, when this happens the green light post flashed and so does the display on the control panel and we get an error...