Search results

i was trying to track down a shop tool... a shop i worked at about 10 years ago had one and think it would be good to have one. It is a table top saw, that has a small 4" circular blade, it runs on two rails and has hold down clamps, squared stops etc all with meauring on it. it only cuts up...

we have done it both ways, we try to keep it on the roll whenever possible though for easier handling

that was a question i was having, are these prints laminated? if so, when laminating, the prints can and will stretch just slightly we use a mimaki and a graphtec cutter, the graphtec will go and find all four corners and compensate for the stretch in the laminating process we do bleeds just...

we have always had great success with graphtecs, with no baby sitting, all kinds of problems with a roland we tried out, and iolines we had too much trouble with, mimaki makes a descent plotter too

as already stated, check out the sba.. also look for your local chapter of SCORE, and see if the local community college has a small business development office, their services are usually free as far as how to set it up, a CPA is the best advice, but you'll get off the ground faster being a...

and after you burn up those rolls, where will the money come from to get the next set of rolls? think long term, not just getting started there's a place near hear that does modifieds for 150 each, with 3-4 specialty colors, design install and all, and the extra money on the side does not...

also keep in mind your competition, up in the KC area you will hear often that a guy named Robbie, signs by robbie i think, is the way to go no question among the drivers racing is a very tough thing to cover, the average driver will want to spend 200 or less on a car, usually much less, and...

its just a license, up to 50 invoices a month for 900 bucks, up to 100 a month for 2000 and unlimited for 3500 bucks they just give options to get more people into it, have we broke 100 invoices a month, no, we hope to soon the question about whats so great about it, to us it is the ease of...

you never OWN the software, you pay for a license and then you can use it indefinately. we love Cyrious, hated Estimate also your trick is the number of invoices, if your license is for 100 invoices a month and you go over, it will not let you convert estimates, that is the option we took...

the 8 pass means just that, the head makes 8 passes over the 1/4" area or whatever to get the true image the lines between sound like a feed comp issue, although i have the same problem time to time

does anyone know where i can track down some racing art, what i am looking for are things like you see on the racing t-shirts, you know of dirt modifieds and late models etc they look kinda cartoonish, yet not cartoon, of just the cars, i see screenprinters all over with these kind of designs...

your probably seeing the FC5100 series, and it is actually a discontinued model replaced by the 7000 series the 5100 is still a good machine and still serviceable by all techs and supported, at least by our dealer without trying to start a war on here, my opinion is kinda like the CE series is...

welcome from up north!:Welcome:

actually yes, it is just that easy we run everything through a hub similar to that, one computer would be designated the host, then the other computer and laptop go through and work just fine, i haven't hooked up the external hard drive for backups through it yet but confident it will work fine

it has been awhile since i have used a similar setup, but i remember something like that happening to me. All it was for me was the setting in the plotter of the GPGL or HPGL...switched it to the other and worked fine funny thing is, the software i use now shows it to be sent as GPGL, but it...

perf should be laminated, not only does it protect the print it protects the driver without the lam, it rains, now the water is sitting in all the holes, and you can see out but it is very blurry, i didn't lam my back window years ago and always bitched when it rained that i couldn't see well...

1. Which template collection(s) do you use? Pro Vehicle Outlines 2. What program(s), including version number, do you use them with? Corel Draw X3 Illustrator 10 3. When you open or import a template from your existing collection or work with it, are there any reoccuring problems...

well, we had actually put it off and just dealt with it, all this time ... what i did find on this one, is the upper gear was dragging against the bearing, took the cover off, loosened two screws inside and worked perfectly fine, but still got a replacement, can't say enough about having a...

thanks John, that did the trick...i appreciate it:U Rock:

We jsut recieved a disk from a client, that we are having trouble with. We have illy 10 and corel X3.... this is an EPS file, when try to open it in illy, it says that it was created by a newer version and to resave it now in the past i have gotten around this, but cannot remember how, i have...