Search results

Check the encoder with light. there are little lines printed on it in a high frequence: perhaps to much "cleaning" can rub that lines from the plastic.

E-IO-40 is an encoder error. Check the linear encoder for dirt oder damage. If anything is ok with the encoder, it could be the cabling to the I/O-board or the board itself. E-IO-110 regards to faulty data from the encoder too. Suggestions are - in addition to clean the encoder - replacing the...

The setting will be set automatically when selecting the profile. With "profile created for the pink", what does that mean? Do you have a printer with an pink ink channel (some subli printers have pink flourescend ink)?

The exact error code would be interesting. A DMA-Error is an internal communication error, for example between mainboard and head board.

Unfortunately thats a known problem with that printers.

I have checked some documents, and it could really be that a switch of the color modes is not easily possible (just with changing the ink chips). Sorry (not shure).

If you want to use the configuration you mentioned, you need to remove any tube bridge and close the connectors with a special cap (as far as I remember, please check). I think they should be in the accessories box. Not shure about the color mode settings, how to change it, or if mimaki...

You need to change the ink tube configuration. In the installation guide (if you don´t have yours anymore, you can download it from the internet) you will find the different color modes and how to change the tubing. The printer is prepared for your preferred ink configuration, you just need to...

At first, you can switch off the sensors for continue working with the cutter. You then need to take care yourself when you are out of vinyl. Unplugging the switch was only a test to check if the switch is broken. Because of the sensor is the problem, it was expectable that nothing happens.

When you look at the menu for the markers in the contour cutting dialog (or the markers dialog in PM), you will find an "Options"-Button next to it. "Only the markers" is the basic setting for OPOS, in the options-box you can add "OPOS XY" (additional line at the beginning of the job), "OPOS...

As far a as I remember, a horizontal arrow appear. The tip of that arrow needs to be on the right of the asterisk. If not, you can move the asterisk with the arrow keys. With a display you cant see anything on it its hard to make a diagnose. First try that with the switch.

If the sensors react, and the level goes over the asterix for both sensors, you can unplug the switch from the mainboard, set some media, lower the pinch rollers and switch on the cutter. If the switch is really the problem, with the switch unplugged it should load the media.

How do you define the cut contour? By the way, if you can choose OPOS, everything should be ok.

Front to back. When moving, it switches between covering the sensor and open the sensor. You should see a reaction level on the display. Covering half way from left to right doesnt make sense.

You should not write with caps lock,is difficult to read fluently and lot of people understand that as screaming. If you cant select settings for the cutter in the RIP/Print Dialog, it could be that your file dont contain a cut contour. As soon as it is, you will have an additional tab in the...

I told you how to check and adjust the sensor, have you tried that? For letting the cutter start loading media, the little blue switch needs to switch (you should hear a „click“-sound), and the back sensor should recognize media. If nothing happens if you cover the back sensor you need to check...

Yes, wiping the head with print head flush (with a tissue on the fingers) is what I have meant. Need to check myself were to check the pressure. On the back of the machine is an adjustment screw.

Check the vacuum pressure. Do you have any head cleaning liquid? Do you knkw how to clean the heads manually? If manual cleaning wont help, wet a linth-free tissue with head cleaning liquid and tape that tissue below the heads for several hours.

Is it a Summasign with display? Or one of the Summacuts without one (but, as far as I remember, they hadn‘t two sensors)? If Summasign or Summacut with display: There are procedures to check and calibrate the sensors which are described in the cutters user manual, which are still downloadable...

With a Mutoh, you had the choice to get Photoprint (old Flexiprint) or an Onyx RIPCenter Mutoh Edition. But you cant download it anywhere, because you get a software box with a Dongle. If you dont have a dongle, you dont have a licence. New Mutohs come with a software named vertelith