Search results

No. You need specially coated media, thats true, but they print not only on paper. White is the same problem as with metallic: high pigmented inks which makes a lot of problems if not used frequently. And, the density of solvent white ink is not very satisfying. You have a lot of ideas which...

You will not be happy with an eco-solvent if printing just from time to time. When using metallic ink you will see that even without printing you have to buy new inks every few months just because of maintenance ink loss. The Epson with Light Gray, orange and green ink will print much more...

For example the Epson Surecolor SC-P7000 or SC-P9000.

These printers are used to print fine art, should last years inhouse. With low volume, you will not be happy with solvent metallic. Printers with metallic ink (as white ink too) need a lot of maintenance, and the metallic effect is gone when overlaminating. And metallic prints dont last as...

Why not using one of the Epson or HP Photo Printers?

I have sold and have supported them too. But I never have told my customers later that they have bought the wrong printer, it depends on the requirements. A lot of people have printed with the Latex 26500 for years, and were satisfied. If the questioner have problems like "I want to print deep...

A suggestion to buy an other printer is not really solution-oriented. What do you mean with "choosing the correct output media"? The settings in the printer only defines some technical details, the colors are determined by the color management of the RIP-Software. And there are a a lot of...

Flexi 10 is too old to support i1 Pro 2 native, but the Pro 2 is downwards compatible with the first generation i1, so you can configure the i1-Option available to use your device.

If you need a gender changer, you shurely have a wrong cable. Is it correct that your cable have male on one side, female on the other? Then you have a simple serial cable extension, which is wired 1:1. The summa cable and standard null modem cables are F:F .

If the adaptor is correctly installed and configured, a wrong cable could be the problem. Be shure to use a null modem cable (original summa is one). A lot of „serial cables“ on the market are just extensions, they will not work.

UV ist inkjet-printing too.

Since version 5, to use the mutoh MSA-tool for example to upgrade firmwares, you need to have a „Mutoh Club for Dealers“-Login too.

There is no possibility to add pinch rollers to the SP300/SP300V. The pinch rollers should be interchangeable (the pinch rollers only, not the complete units with the holders), but: the outer pinch rollers are different than the middle pinch rollers (they are slightly conical).

Such a shame that onyx wants to earn money, and stops supporting very old software Dont hope next time someone will refuse payment to you because you have used „media laying around and ink which was in the printer anyway“. Deal with the fact that software is a product like each other.

You can still buy Onyx Updates as well.

To remove the head, you only need to disconnect all cables, and loose three black screws. Very easy. The only thing you need to take care of is to set the head back in the correct height and in an exact 90° angle. You need a thin screw driver, because you need to go through the head mechanics.

Which version of onyx thrive have you re-installed on which operating system? Could be a problem with access rights. Try to start as administrator.

If you print without color management, you have no ink limit, no linearisation and no ICC. It will be very difficult without at least ink limits. In Flexi, you have different possibilities to set the dithering for printing, some are more grainy than others. But grainy prints could also be a...

The SC-500 doesn´t had heaters by standard, the first generation Eco-Sol-Inks won´t need a heater, but have printed on coated media only. That with the controller on the left side is the original Roland retrofitting for second generation eco-solvent-ink, delivered in 2004.

Flexi can import measurement (text) data to create ICC-Profiles (if you have a version with ICC-Profiler enabled), and can import standard ICCs. But for a printer profile, in addition to the ICC-Profile, the printer needs to be calibrated, what means creating the optimal driver settings, ink...