Search results

This was a print from our first use of 1105. Our rep. Sent us a new roll and it was fine. They took that print but never said what could have been the issue. We also got the ( we never heard of that happening) thing to. It was nice to install but we have returned to the 3M just because we never...

Looking for a source that will laminate with 3M 8991. Or something like it. Thanks

I agree, looks like its following nodes with 3 pass. If that's not it, maybe turn the router on and move it to different spots on the table and check the gantry by hand on each side for any x,y movement.

Is this going to be outdoors? If so, make sure the MDO is edge sealed good since that's the area for rot. Maybe you did, It kind of looked like raw edge painted over in one pic. And for me, I try not to do too deep of a inset letter. It will hold water and turn that pretty white green and start...

I have no local reseller in my area. I called Ronan and talked to Denis. If you are a sign shop he will ship to you direct if you buy say a couple quarts to make it worth their time.

I recently tried the Sika post mix you can buy at Home Depot for a few smaller signs. Seems to be ok, but we have clay soil around here so it fills fast.I don't think i'd use it on larger signs, but single post and smaller double post seems like a good fit.

We use Signlab as well as AI. Without knowing your printing setup, I would try printing with profiles off and then on to see if thats the issue.

Maybe you meant to hit COPY. I think if you lift the bar and reset using roll 1 or roll 2 it loses that info. Maybe totally off point here. Video will help.

The 2 cents per pound is for ACM.

My local scrap yard pays 2cents a pound.

If you are in the range of Pioneer supply, I know they have 2 w-64s they are selling cheap. I have a w-64s and they work great if you are looking for a solvent printer. Once a week cleaning ( 5 mins.) and good to go. And CPManager is nice too that comes with it.

Seen Queensryche last year with Todd, It was great. Just this week I did the 90 days free Google play music and have been listening to a lot of old metal. I have a load of signs to paint and I've gone through the catalogs of Mercyful Fate, King Diamond, Fates Warning, Black Sabbath the Dio...

IJ680 works.

I put the VHB tape on the letters. I then stick these letters onto a clear liner (like 8518 liner) that is over top of my pattern. Then I transfer tape them in place. Go to job site and line up on wall like vinyl. Tape top and pull liner out from behind and stick to wall. Pic below is after...

R.I.P J.Hill. Truly missed.

Try Trim USA.

Trim USA. They have masked or unmasked.

If your talking stand-offs, we use MBS.

Try Carsonite.com they have some parks and rec post in 8'. We have used carsonite around here for marking bike trials.

+1 for me, Yea.