Search results

Flexi 21, in opposite to Flexi 19, has - among other things - the following new features: - New functionality to print variable data (including variable pictures and so on) - Multi-Layer-Print (for printers who supports it) - Jig-Templates - Preview of output channels (good for checking White-...

It depends. Flexi 21 has some interesting new features for printing, for example new features for printing variable data.

You should adjust the vacuum pump. There is an adjustment screw, accessible at the back of the machine, where the ink cartridges are located. There is a suggested range for the value which is shown on the display when entering the vacuum pump adjustment menu. Unfortunately I dont remember...

Yes. But sometimes bad settings on a PC can generate a lot of load to a network too.

Sometimes the problem is something which makes a lot of traffic on the network. I sometimes have needed to configure printers on a separate LAN-Card with a crossover cable to let them work well (I‘m a supporter).

As far as I remember, Latex 360 isn‘t supported by Onyx 10 (too old).

Do you want to use the software for vinyl cutting? Or Print & Cut?

Regularly Mutoh bundles their printers with Flexi or Onyx. But most RIP-Softwares supports Mutoh Printers and contour printing with Summa Cutters.

Shure you have setup a 100BaseT-Network with appropriate cables?

Is in the Production Manager, at the same place at it was in 7.6.

Perhaps you have pre-configured 5 Copies in your quickset?

Junction boards are only for connecting things together. There is no big electronics on it. You should be able to repair it with a soldering iron. SP300V was discontinued in 2009, the SP540V in 2007. Most of that companies keeps parts on stock for 10 more years. It will be hard to find such...

No, this never existed for that devices. And if it had been otherwise, the parts would no longer be available today.

The printer manual should contain info about the suggested ranges of humidity and temperature. Of course issues with that can lead to print quality issues. Even the print media can be the problem.

If you like Roland, you can buy a Truvis VF2 Print-Only.

The Summa OPOS X for example works much faster and with much more functionality than the roland system.

It looks like that some machines work better than others. Plain color consistency was a problem, „cloudy“ prints in blue areas for example. I myself have tried to adjust it, we had different values on different spots on the table with the same adjustment print. Perhaps the next generation is...

Today my boss announced that we do not sell the V7000 anymore, epson will pick up the printer soon out of our showroom. Massive quality issues which should be state of the art (epson says), but we know (from Mimaki flatbeds) that much better quality is possible ... we stop it.

Then a lot of things could be the problem, everthing in the ink lines from blocking valves between cartridges and subtanks down to dampers and heads.

Have you checked this tubes during cleaning? Regularly this tubes are empty, leading ink to the waste ink tank only during pumping. If the tubes arent filling during cleaning, it could be that there is something wrong with the cap top or the pump. How old is that maintenance kit?