• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1.

    Mutoh Falcon Outdoor printing horrible

    Your lack of light green gradient is color profile/color management issues. All these 'lines' would appear to be in the image, as they dont appear directional from the printer? You are missing a few nozzles as well.

  3. Falcon Outdoor 48 media Roll

    After a bit of searching: Part # is MY-24651 Scroller Bar for FO 48 includes flanges MSRP is $478 We have two in stock.

  4. Update on the real Bigdawg

    Like so many have said in so many words. Live out of love, not of fear. We all wish the best for you.

  5. Stainless deep etching possible ???

    Beware of the dangers of HF.

  6. In need of Media Scroll Bar, cant find anywhere!

    Your Mutoh dealer? http://www.mutoh.com/mutoh_dealers.php

  7. stuck on warming up

    Probably not reaching the temperature setpoints. Could be sensor issue or heater issue.
  8.

    Falcon print head alignment

    The picture is a bit confusing. As there are gaps between all colors. If there is only a gap (left to right) between the colors and black, then this is a timing alignment, sorry but it has been too long since I have done one to remember. Perhaps someone else will chip in and give the procedure.

  9. screen color does not match print

    Here are some articles from Rich Adams to introduce you to color management: http://www.mutoh.com/color_management.php

  10. Blurry images , Rockhopper II

    Head height, check it on the printer and the RIP. Also check the carriage fan and turn them off. Make sure no fans or air flow is being directed at the platen. Static?
  11.

    Misfire problem

    First clean your timing strip.

  12. mutoh falcon banding

    No, but obviously lower.

  13. mutoh falcon banding

    Almost always temps settings that causes the media to expand and cockle. If not could be dirty rollers.

  14. 1624 and flexi upgrade.

    The best place might be the dealer you are buying the printer from.

  15. Stumped and Frustrated

    http://www.mutoh.com/kb/entry/8/

  16. mutoh rockhopper 1 install help

    You can test print this way: http://www.mutoh.com/kb/entry/68/

  17. Blurry images , Rockhopper II

    Head height? Head alignments? Profile?

  18. Rockhopper 2 How to change ink set CMYKLMLC to 2 x CMYK?

    In the maintenance menu?

  19. Printer stopping at 2%...Mutoh/Flexi

    The printer still should not stop mid path. You may want to back up your files and profiles and clear Preferences in Flexi.

  20. Printer stopping at 2%...Mutoh/Flexi

    Steve, Make a mark on the media and see if it stops at the same point each time. Give this a shot: http://www.mutoh.com/kb/entry/68/ Might be this: http://www.signs101.com/forums/showthread.php?t=76156&highlight=jr+stops+printing This sounds like a printer issue, and not RIP...

  21. VJ 1614 Takeup bar pulls back (Prev. stick)

    Set it to Type 1 Should solve your problem.
Top