Search results

Dry, dirty or scored bearing raceways? Belt or driver motor?

Peruse the mutoh ftp site under printer information manuals.

Too much room light or sunlight, on the 'eyes' -the sensors can cause similar issues.

The official description: E 016 error AddErr-S [05] Address exception error (store): Address error in saving process. Could be a number of things including power fluctuations. Defective mainboard. Incorrect serial# tied to firmware.

This might help. http://www.mutoh.com/color_management.php They are unique to your Ink Set and Rip. They are best optimized to your machine.

You need to find the cause of this. Typically, it is the swelling of the cap pad, very rare in Valuejets, but it does happen. You are probably in for at least a cap, if not a maintenance station.

Cleaning? Check the gear mechanism.

You need a profile writting on your machine FOR your ink and media.

Probably an air leak, maybe a bad pump.

http://mutoh.com/kb/entry/137/

Then probably an air leak. If there is air in the line back to the cartridge. Then can be cartridge, needle, connections. If no air in the line, Then probably connection at the damper, or damper connection to the head. Or ink is not optimized for the heads.

You have a lot of plugged nozzles. Try head soak.

No, it actually counts the number of time the pump cycles and give a warning on expected lifetime. Yes, they probably last longer than that. Just a heads up.

I have had very good results with Herculite banner. Could it be your vinyl?

Sorry, I couldn't find any in our spares bins here. They are a bit rare apparently, especially the hex ones.

Doesnt look like we have one either. You may be better off finding another used one for parts.

If this is a 'W' then this is a water based printer, probably for dye-sub. If so, you will need a "profile" designed around your ink and transfer paper.

Check for a leak at the damper connection. Worn oring, too loose, too tight Do you have bubbles in the air line from the cart to the dampers?

Looks good, I had a request this morning for Ill plug in. THANKS!

Are you supporting the Mutoh Ultima's and Kona's?