Search results

I like it a lot... but not sure what I am looking at (I have a laser too)? You cut a white surface panel, a black center panel and then a white rear panel with a keyhole slot? So the black was cutout to allow a screw head? And then the print was applied first surface? Thanks Gene

I have the same problem with my RF640 and have not discovered anything, but I would like to. Gene

Are you coming to Minnesota Fred?:thumb: (I am in San Diego btw) Gene

We started 20+ years ago with computer knowledge but never having been in a sign shop. Talked to Sign-a-rama, they showed me 8-10 shops and let me talk to the managers... and I thought, I can do this... so we [my daughter and I] did. My first task, after learning Flexi, was teaching her to...

If you like Gemini, their Duets is pretty much the same as Rowmark (which bought Johnson Plastics) and a bit cheaper. Duets is now distributed and stocked by JDS. Gene

Yes- 900x1300 130watt Chicom laser with RDworks software

I have a sample book of different colors and finishes for the MAX-metal brand (sold by Grimco) so I figured it would be good to know how the different finishes engrave for future use. In a word- it engraves fine, mostly. As you can hopefully see from the pict the mirror finish was almost...

By the by- the 10,000 hours is not burn time, we have determined that is is time from manufacture- even if not used. That said, for the price of a US tube (or recharge) you can buy a lot of glass tubes. Gene

Glass tube indicates Chicom manufacture, tread lightly- there are terrible and there are good mfgrs. Gcc appears to be Taiwanese, if you are not familiar with the technology you might want to try a N. American company which imports chinese lasers and actually support them. Gene

180c & 1080 which are dry apply... those are air release so a whole different ball game. Gene

My customers like .060 styrene cut on our laser.

Yes it does- been using it for 20 years. Most brands have it and it is pretty inexpensive and thicker than cast. A stencil is re-usable and requires a stencil stye font so the centers do not drop out. Gene

I think you are talking about a paint mask?

VV- you sound like someone who has never done one? You are right, the paint is cheap. The materials are not so, and a *lot* of elbow grease. Not raggin' it is just more work than you could imagine. Gene

Thank you sir- I have a 36x48 laser but occasionally need larger blanks that we put second surface vinyl on. Gene

Derf- hat specifically are you using Please. Thanks Gene

52x102 white- $50 a sheet. No shipping. Gene

If it is set at 12 inches- it should cut the 1st 12inches, and then move on to the next 12 inches- etc.

In my older version it is in Cut/Plot> advanced settings> Optimize cutting order> then set how far you want the job to process at a time in inches

Better drugs?