Search results

service application software for the BN-20 I have the service manual but are wanting the software to perform checks etc on the machine Can anyone help?

Would say around 6 + years old, will investigate pump further thank you

My white ink is draining backwards down the lines, I have replaced captop with OEM part, drew ink to the head immediately but overnight the ink line was empty, replaced with a new OEM white cartridge, and again ink went straight to the head, but once again overnight was empty, I assume it's...

Inkscape is not my go to software but comes in handy (nomally use adobe illustator) I have been given a file from a cutomer who kept fonts as fonts and of course I dont have some of them (normally not too much of a problem) But this is new to me as they are listed as Arial Black, Arial...

I use inkscape for barcode and QR code, then save as eps and import into illustrator

Check your shore hardness of the rollers, or if looking to buy one ask the manufacturer, you want it around 80 shore or more (very hard) mine like alot is a chinese version and unfortunatley is only 40 shore and is too soft for good results ,even with a hard sheet underneath, was going to chuck...

Dr Decal and Mr Hyde in Australia, 500mm wide by 30 mtrs plus now a wider roll size, eco solvent printable, dont know if this helps you, I use it all the time for my bn-20

looks to me as they never cleaned/prepped the surface properly, look at all the crap/dust etc on the adheasive side of the curled sticker

I do ALOT of waterslide using eco solvent ink, Roland BN-20 I get my media from Dr Decal and Mr Hyde in Australia, 500mm wide roll x 30 mtrs, I beleave they now offer wider

I have but are in New Zealand

it sounds like you are printing the swatch library form a file? this is probably where its going wrong as you are able to change profiles etc. you need to print the swatch out of versaworks (it is built in) and is not able to be edited, open versa works and go to media-colour chart 1, and select...

what material are you printing on as your nozzle check looks perfect and you shouldnt be getting such a rubbish swatch print out

Dr Decal and Mr Hyde in Australia, I buy it in 50 mtr rolls for roland eco sol max

and it the captop is not clipped into its proper position, it is sitting too high

your spring on the side is not there

i use marajet 440ml with no issues, i have a support under the cartridges to take up the extra weight

easy as, i use a 300mm x 300mm square of either black or white vinyl help in place with magnets, photo graph square on and load photo into your graphics program and scale up till that square is 300 x 300. You will be within a few mm of actula dimensions and saves measureing the whole thing up. I...

Found that you need to understand the colour management side of versa works more, the answers are there, just need to do some serious homework with regards to the preset you select, in my case MAX DENSITY JAPAN gave the best colour correctness and no vertical banding

Did you find a work around for this? It seems to be the downfall of the bn-20 when you want to do serious media specific jobs the profile just doesnt exist, yes Im having the same issue, yet fi i change to a cheap vinyl (fusion bigital base 100, the same job prints perfectly so yes has to be a...