• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Roand VS540 Stuck in ink filling mode.

    put it in service mode and go yo ink type and select your configuration.
  3.

    Need Help Ordered new DX6 Did I get a fake or ?

    digiprint sells dx6 heads. Rolands are dx7.

  4. Need Help Cut ACM twisting....

    Im 100 % positive its a table saw. Ive seen the entire operation.

  5. Need Help Cut ACM twisting....

    nah its from the vendor cut with a very precise table saw

  6. Need Help Cut ACM twisting....

    Hi Im dealing with getting ACM cut at the vendor from full sheets down to real estate riders, then printing them on a UV. Problem is they are arriving twisted, almost like a propeller. if I get a short side flat on a table, the opposite side will have one corner up about 1/4 to 3/8". Anyone...

  7. Who is responsible for paying for repairs a serviceman created by their own doing?

    PM me
  8.

    Mimaki CJV30-130 Dripping Ink I need to resolve issue.

    where in minnesota are you?
  9.

    Mimaki CJV30-130 Dripping Ink I need to resolve issue.

    hire a certified tech like me

  10. Different Color Stroke

    post your file or pm me. I'll tell you what the issue is.....

  11. Different Color Stroke

    spot vs process?

  12. Where's the cheapest place to order a large number of 8'x4' coroplast signs?

    Firesprint.com

  13. Need Help CutContour does not show up with gradient?

    screen shot. what youre saying isnt very clear....

  14. ROLAND XR-640 WASTING LOADS OF INK

    clean the capping sensor

  15. XR-640 ink dumping or draining into waste bottle. HELP

    email me if you still need help

  16. XR-640 ink dumping or draining into waste bottle. HELP

    new cap tops isnt going to stop the machine from dumping the inks. is all the ink going into the waste bottle or are they dumping onto the floor or into the printer?

  17. VS-640 Circulation Ink question

    is your machine configured correctly? if you dont have white or metallic installed, it shouldnt be running the recirc pumps
  18.

    Xr-640 print test issue

    is that metallic ink? your captop could be partially clogged. but likely the damper is clogged or the metallic havent been used in a while and starting to clog in the head.

  19. XR-640 Cutting Force Problem

    need to make sure that the carriage travels level with the material.

  20. XR-640 Cutting Force Problem

    Have the techs measured the rail to platen distance all the way across?

  21. XR-640 Cutting Force Problem

    what blades are you using? Who replaced the cutting strip? and was the cutting strip OEM Roland? Bearings and rail are in spec? Have you replaced the blade holder? Is your blade holder the black plastic one or the steel one?
Top