Search results

I got my sample as well as the laminate and had no issues. I actually ordered a whole roll of it glossy 54" and so far have been pleased. Im not concerned about it holding ink or going through printer because it does that fine but want to see how it holds up outdoor unlaminated, since we do a...

Can I ask why you don't use 3rd party? I know in my Roland I've always had ECO SOL MAX INKS and switched to Lyson inks for them and only pay like $80 a cartridge and have had 0 problems. Maybe I'm just lucky but either way just wondering why you wouldn't give them a try

I would appreciate that and yes I did find the phone number and the address that is supposed to be theirs on the website. I just want to make sure obviously its not some scam site where next thing you know you have $0 in your bank.

Wondering I read a post from 1 guy on here saying he is using this material and I was just wondering if anyone else has tried this? I went to their site and its fishy I can't find a phone number or anything or where they are from and that concerns me. Then I see the pricing and it is cheap...

I had the same problem on my JV3 130 SPII awhile back and I tried doing a clean and everything and nothing helped so I ended up flushing the lines and it took care of it. Not sure why it did that but it was like my lines were getting mixed somehow. Regardless same problem here and it is most...

Everything on machine is very mint condition wise. I spoke with a roland tech and even though a buddy who is a roland tech told me 2 pinch rollers were fine the Roland Tech from Roland itself said I needed 1 in the middle. I did do a test print of 30" material by like 5' and it tracked true...

So after everything is said and done I am going to add 2 more pinch rollers to my machine. I just put in a 30 inch roll of material instead of 54" and cut about 100 2" x " shield stickers out and cut perfect. I was told when I purchased the printer there was only 1 roller at each end and it...

Same thing happened to me just a couple weeks ago. I use go daddy and everything is backed up on there assuming you don't have a delete setup on your outlook or live. Now this is with godaddy and windows live but you should check to see whoever your email is through such as Go daddy for...

I use Flexi 8.1 and save as an EPS. I make sure I have margins set for it too. The area of this was like 32" x 48". With it being just words it shouldn't have any problem cutting that, right? IDK I just know this is going to make me a lot happier to be golfing today then to be in the shop lol

Attatched pic from this morning.... Just cut some words out all 3" - 5" tall and awful results. Please remember this is calibrated correctly and with EPS I have set the margin to .25 so that should fix as well and then boom a 38" x 49" section of lettering if more then a 1/4" off. I normally...

Did a print and cut adjustment this morning actually. I called Nazdar and spoke to the tech over the phone to make sure that it was done properly which it was but I'm still getting that slight miss. I mean the machine is wonderful don't get me wrong but for some reason it just won't cut well...

Do you find it a lot better with registration marks? I don't use them but just did a 3 line section and it was still off. Please let me know and thanks

Good idea Gino....I will try that my only concern is I tend to do 500-1000 stickers of 1 type quite often and my concern isn't just that but what if I need to do lets say a 3' x 6' van layout and contour cut it I am worried that even letters and such wouldn't track well enough. I guess I'll...

Okay guys so I've written a couple posts on here about my Roland and for the most part got anything needing fixed taken care of and fantastic. Problem I am having is still the Versacamm VP 540 I won't cut very well at all. For example I did 114 stickers roughly 2" x 3" with a nice white...

Encoder strip is good and everything is nicely plugged in. I did square up the material best I could to make sure since it did seem a little off. Much better cutting now though like you mentioned I am not doing much over 4 feet. I am looking myself at a Summa because of this situation but the...

Okay so I am new to Roland and always been a Mimaki user but am finding it difficult to get the Versacamm 540 I to cut correctly. I've read up a lot on the cut calibration and though I haven't done it yet is because my machine will cut just fine if I only do a line or 2 of items. Today I went...

Have slight banding on blackish colors and the nozzles are good wondering how I would do a feed calibration...Sounds dumb but I'm a Mimaki guy and just put the roland in only 3 days ago. Any help would be great

Mike I hope that works it would make it very simple and thanks for the tip. I know I sound a bit stupid but I have never worked with versaworks before. THanks

Finally got it running I had to update like 3 times which is what caused the problem but we got it and thanks for your help....now trying to learn how to contour with it since I'm folly a flexi user

You do have flexi 10 pro correct? I know it sounds obvious but some people don't realize you can't print if its not flexi print or pro