Search results

When I turn on the machine, the cap stand moves down and then I get the 0110 error. This has happened several times in the past and I just power down then back on and it usually works, but now I can't seem to get it past this step. I just read about cleaning the encoder strip, did it with a...

Ok, I use Illustrator and then run my file thru Versaworks, just did a basic boat lettering job and set the black in illustrator to the black swatch, ran my numbers and the black is not a pure solid black like the print/alignment/cut marks the machine printed once I laminate it. Not a head...

I'm trying to get a good cut off my SP300, the test cut square does not complete the cut, this is running on vinyl and lamination but still same issue with only vinyl. New blade, I adjust the speed down, offset should be .25 and I adjusted it down to but no effect. Do I need to adjust the...

I haven't done much cutting on my machine, just did some print/laminate then send it back for cutting. Some of the corners seemed to not have the cut path cut all the way thru...I had pressure about 90 and speed I think 30...was it set to cut too fast? I know I need to give a little more...

Can anyone give me a base setting for my cutter pressure when cutting vehicle graphic media after I laminate it? I use about 85 for unlaminated now and a real slow cut speed.

OK, I have all my new parts in from ordering. New print heads, dampers, wipers, scraper for the wipers, spit sponge and a new set of OEM inks coming in too. I took out off my OLD print heads to try and soak/clean back to life but the black is dead...so just putting in all new parts. First...

So I'm cleaning up and refurbishing a machine I just got. Ordering a new spit sponge and also the little T sponge...I see LOT of ink under where it drains and thought it was leaking and not draining somewhere but then discovered it is a tray with an absorbing sponge that it all drains down...

I have one I got about 2 years ago, it ran all the functions but heads were clogged. I bought new both prints heads, capping station, some dampers and a few other parts online over the years, I need to find a black damper now, new tubing and a few other parts to bring this thing back to life...