Search results

Any issues if I use a cheaper white vinyl for base like you did and then put my laminated graphics in top of it?

Customer wants me to put plain white vinyl on his food truck where I removed the old vinyl. Then wants me to print his main logo and apply to the white vinyl, does not want it all printed yet so we can add more graphics later. My question is I will print graphics on Orajet RA and laminate it...

What’s best solvent to remove grey adhesive left on the trailer after heating the vinyl to remove? Used a stick to pull vinyl off easier, grip like doing a pull up and a lot les strain on my hands/fingers!

TY hanks for info

I’m removing a large wrap from an old food truck and with a razor knife score smaller strips to remove it a lot faster and easier with less force pulling. Is there any tool made for scoring the vinyl but not going deep enough to cut into the metal on the truck? Would be nice to have one for...

Elbow grease and a lot of cuss words? I’m removing a big wrap and scoring it so smaller sections peel off faster and easier.

Nice job!

I was thinking about doing the front of my dishwasher to look like a wine cooler.

Just wondering if anyone has ever done it for home decoration use and how it holds up? Any pics if you have?

If you put a bird into space will it float around in zero gravity with its wings open like its flying or just keep them closed and think WTF how am I flying and not using my wings?

I have met Kent at Macmedia and he has helped me out just fine.

Any reason why you can not just take the 2” or larger angle and then just attach it to your sign (bead of liquid nails and screws) like a picture frame, have it larger than the existing sign frame so it fits OVER it like a shoe box cover and then fasten it with screws from the outside? Put some...

I followed the service manual myself and put in 2 heads, dampers, wipers, encoder strip/reader, new cutter blade,caps when I bought a used machine with clogged heads, was easy if you took the time to understand the manual, align cutter/heads. Runs like new now except for reading shorter paper...

Just wondering what causes the fuses to blow? Power surges?

I use something called Art Resin that has UV inhibitors for some art work pieces I make on glass, mix a/b and pour on a level surface, then take a butane torch to heat out the little bubbles....becomes crystal clear. May work for your needs? Kind of like the bar epoxy resin but better.

Did you try an auto cut adjustment in the menu?

when you clean the heads on your SP300v I have the cover off it and watch the steps, the caps lower and does it shoot ink out into the caps, then go over to the wipers to scrub them, then it does the cycle again. It will also raise the caps and sound like it is sucking down the ink at times. I...

I put in new print heads under a year ago and have had perfect nozzle check patterns, done minimal/low end printing but run cleanings often. I haven’t been able to get it perfect again, but is this check pattern ok or do I need to really try to clean it well? Did one heaven clean and 3 medium...

I also took the cover off on the right side and put a swab stick in the switch so I could watch all the movements while testing with the cover off. Just make sure the caps go back on the heads so the don’t sit exposed if you are shut down, don’t dry them out. I put about 3 drops of cleaner on...

Did you manually move the cutter all the way over to the left?