Search results

making fresh meals involve inmigrants working on the fields..... if they do not do the job, who will?

If the printing time and cutting is not a problem, then print them in batches of 100, you do not have to count them if done this way. Or, print them in batches of 500 or a 1000 and then weight them divided by 5 or 10.

I had the printhead missing the top half of the cyan and yellow, no luck getting the ink to be even, black, magenta test print was great, but cyan and yellow, only the bottom half was printing, we replaced the print head, and about 8 months later, we had the same problem, the difference was in...

hope this will help you. My friend had an RS640, printhead stop firing the red color on only one side, he did everything possible to get it back, but no luck, he ended up selling the machine to the vendor he got it from, he just replaced the print head and sold it.

for all of you having this problem, connecting and disconnecting from network on a Roland printer, actually on Friday my coworker used and printed 4 posters 24x36 on a 54" roll paper, unfortunately, he did not print all 8 the customer needed, on Monday, I printed the remaining 4 posters and took...

by the way.... my RE640 does not have that option.

Check your blade, looks like it is not tight, I had a similar problem and I found out that the blade holder was loose and moving away from the cut line, about 1/16" of an inch, when moving to the left, blade was to the right of the center poing, same as the opposite direction and so, top and...

Hello to all I have an HP later printer that is been working fine, but....... this Monday I came and was not able to print to it, no network connection, issue is that the IP address the printer is using was input manually, however, DHCP was not selected at that time, now the same IP address on...

just do not cut the sheet..... do it manually. until you find a solution to it.

I have printed on magnet material on my Roland, what I do is to find a table tall enough to the height of the feeding in the Roland printer, this way it will not touch the round material when feeding, it prints properly, but...…. I do not print onto .30 magnet material, it is too tick, I print...

I believe you can select to cut without cropmarks, it will just start to cut.

I have flexi from a while ago, and do not use it that much, but this is a good tip, I also have a Roland printer and when I print a file about 40x60 with only 2 letters in color, rest is white, Roland start printing on the color, it advances all the way to find the color, prints it and then...

I have a latex 365 and will try to print perf on it, I will post what the result is.

Your are correct, but as I stated in my previous comment, this happened to me in another country, that is why the amounts are low, but over there, is a lot, lots of money.

I just made a reference, and did not state where I live, this is in another country. But the point is the same..... he could not get financed and me either.

That of course is very clear that promotions have an expiration date.... however, this should have been in front, to let customers know that starting the new year, promotion is no longer available. That is communication.

it is weird that banks do not loan money in these cases..... I have a house, and some empty land as property, some in the city, with a lot of value, I presented that to my bank of almost 45 years, I wanted a loan of $12,000 only, my house alone is about $150,000 plus the land, presented the...

have no idea why i got this post, meaning that the last comment was over 3 years ago..... I have a latex printer and I will print some graphics on perforated, I have Hexis and will share the outcome later today or tomorrow.

I have a latex printer 365 and I use Onyx and Flexi, when I add a new roll of media, there is an option to check and that is to keep consistent for long runs, I have that on all the media and until now, almost 2 years already using the printer and no problems.