Search results

Thanks ewded. I’ll give It a go tomorrow. Just so I can get my head around this what your saying is that the darker print on the left has 20% more magenta than the right one? The file was created in photoshop by our client. We placed it in illustrator and created the 6 prints. We do this for...

I also should have clarified that the print on the right is correct to the other 4 prints. The left one is the odd one

Thanks ewded. When you say missing 20-25% how to I rectify this? Are you saying up it in the colour settings?

Hi All, We have a jv33 and have run into something we never have before. We printed a large wall print , split into 6 panels. We ran the rip and printed all six one after the other.. When we rolled it out 5 of the prints are perfect, 1 of the 6 is really dark/colour is off. The one which is...

Hi All Really appreciate the responses. Good news is out print room currently running 3 printers is now set to 74 degrees and w heavens lost a inch of material!!! My next battle is working out our factory area. We have additional space in a factory and with the printers in the room we now...

Thanks for all the help and responses. I will look into the dehumidifiers and try running the AC as a higher number constantly. What kind of temp do you all keep your print rooms at 24/7?

Thanks AF. When you say poly sleeves do you mean like the plastic slip over cover they come in? If we make sure they are stores in poly sleeve air tight do you think that will fix the problems? Any thoughts on the rolls which stay on the machines over night and the damage they are having?

Hi All, Did a search and couldn't find anything similar...maybe this problem is just us. So we are based in a fairly hot high humidity area and have run into the ongoing problem of heat damaging our vinyls. When we leave any vinyl on a machine that is not in use it kinks and waves and is...

Hi Terry, No I didn't. I never could find the fuse referenced above, and I believe maybe the head is gone. I did a full FW and parameters reinstall so function wise the printer is ok. Once I did this in had a HED MEM error which as far as I can tell says the heads fired. Got busy and kind...

Hey all, thanks for the replies and pictures. Either I'm going crazy or I don't have that fuse on the board in that area...or anywhere I can see. Are all the boards the same??? I will take a picture tomorrow to confirm. I can locate all the other fuses around it to match up with the pictures...

Thanks C5 Service&Repair... Just to confirm on the JV33 there is the big and then little white fuse on the Power supply board...not on the main board? Or is there is white one on the main board? If so...were is it? Thanks

Thanks for the replies! I will go through fuses later today and have a look. From memory I think there is a big and small fuse on the bottom right which I will replace. The other thing I have noticed is that when the dampers are primed and you do a ink fill it seems to take the ink from the...

Hi Terry, No worries it helped so thanks! Yes I tend to agree with the firmware. As I didn't install the head I'm not sure. Currently the machine is running 3.4 FW. I did trying but booting the machine and putting to 'Remote' then uploading 2.2 FW. It runs through to 100% percent then has...

Little update. - Checked fuses...my board looks a little different to the picture but did check the flow through of anything in the area. - Dropped off our slider board to our PCB repair guy who has fixed up some stuff for us before. He noted a little on/off transistor. - As of now he has let...

To add to my reply, In the research I have done around the forum there has been a handful of mimaki users have similar problems and noted that a transistor on the slider board has blow so was stuck in the 'off' position meaning the printer functions but does not go to on to open ink. These...

Hi Terry, Thanks for all the information, I will check it out today. What I find weird is the printer functions completely except shooting ink? I presume that fuse wouldn't be just for the ink release etc or is it? Thanks

Hi Terry, Yes I confirmed ink at the head. Also if I do a ink full through the front screen I can see ink pull, and also see it pull excess through the pump hoses. I will check out the fuse today...is that the big or little one? Im presuming that fuse isn't just for shooting ink? The...

Hi, I picked up a JV33 recently and have been working through putting it back together and getting it functional. I have replaced most of the items that were of concern and got it running. Weird bit is now, with everything working, it won't print at all. No test print or print from RIP...

Thanks VanderJ. Does that mean that a BS machine with the standard FW can run the SS21 ink without any other changes. Is that all there is to it and no physical differences between machines?

Thanks Blackhorn for confirming!