Search results

i've never had anything bad to say about a heidelberg

so, nothing lights on the large board above the one that is circled in the picture? i will look in the morning, if i have a similar service manual at the office. then i may have something more useful to say

i sent you a message 2 friends in the business close enough to be practical if you need to send or exchange a board just thinking ahead...

yes. i am doing this as we go. making a few assumptions.

the reason i asked, (having done a lot of this, over the years) is that getting a bad used part is not that unusual getting a used part with the same type of defect (or yielding the same result) is more unusual you could be plugging a good power supply into a bad system board IN A VERY QUIET...

green/yellow is "hot ground" for ac line voltage without looking at the machine, your "cold ground" (the one you won't get a shock when you touch it) might be a black wire, as well as the exterior metal surfaces of the machine [the ones that cabinet screws go into] damonca21 mentioned a green...

the "faint zapping noise" you describe is probably the 12v or 5v supply trying to start, loaded down by a short. when you power on, the main board is not generating a "power good signal

nothing against our member, i am sure he means well. would you buy that head on ebay? i would have to assume he was a scammer. reference our thread with adam edge add to that the fact it is an odd ball head reference

https://www.amazon.com/Alex-Tech-25ft-Tubing-Conduit/dp/B07TDGMDW4?ref_=ast_sto_dp a piece of heat shrink, or this would help

for sure you should seal it again. but it has been opened. problem is, you are a brand new member. no reason for people to believe you actually HAVE a printhead

Online labels.com

see if they have a support document for a clean install.

probably because some portion of it has been done in a different "developer kit" or whatever.

with no hint of what version, what operating system, how much free space on hdd, how much ram, you don't give enough info for even a good guess had it previously been working ok? did anything change?

i have been an amazon customer since 2003. (bought an ann coulter book) been a prime member since 2009 i think (bought a samsung color laser for home) i have been trying to find a computer or server memory purchase NOT IMMEDIATELY FOLLOWED BY A RETURN my point being in 21 years, i don't think...

or, perhaps draw through with a syringe? sometimes the installer is deliberately unobservant. i think a lot depends on who he works for...

and, you know, every bank has restrictions, they can only send to certain companies on certain days. payments are delayed by this as well

True, but it might be worth cleaning that rail, since i have seen many people oil or grease them, leaving enough residue to pick up dust and increase the drag on the carriage

you follow my thinking though. i was wondering if the cyan in the line is thickened, OR if earlier prints had too much solids in them & what is in the lines, reaching the printhead is the residue, mostly solvent or carrier. my mutoh MP31 inks need to be shaken daily.