Search results

Looks like a beautiful window! It’s a good thing you didn’t do a large tiled image with your HPs!

onlune rgb has a larger color gamut than online cmyk profiles. But some of the better printers, like the OkiData and Epson line has a wider color gamut set of cmyk inks than the online cmyk gamut. So you create the digital rgb file and then the proper rip software- Onyx , converts it to the...

I highly recommend you go to onyxgfx.com and download the 30 day free trial copy of Postershop. I have been installing this and training people to use this for wide format inkjet printing for 28 years and you will see all the benefits quickly.

I saw this at the ISA show- can’t believe it! Clocked this - ran a 4x8 in 45 seconds!

My customer who is running this ink makes the coroplast graphics that are put around the skids of water that are outside by gas pumps all over the country and the problem with using any Uv printer originally was cracking ink when the Coro is folded on install. So I sold them a Vanguard 300...

The new printers from these 2 use the new Kyocera heads which are huge and have over 2500 4 picoliter jets in each head! They are also high speed firing heads which allow the very fast carriage speeds. For more info or any questions you ca reach me at. 631-520-3074

Vanguard has a new flexible ink available for the 300 which has a great adhesion on coroplast and is extremely flexible and will never chip.

I have been resolving many Latex printer problems with all the customers I have serviced for the past 15 years. My best resolution for latex currently is replacing it with an OkiData Colorpainter or an Epson Surecolor printer

The best option is mesh banner!! They can hang it themselves- Nice recommendation Canuck Signs!

With hybrid printers you must cut a a fully square corner since they aren’t perfectly square sheets of Coroplast. Another thing I have set up for customers is a laser beam mounted to the ceiling above the printer. Set up the laser to line up with the 8’ long side of the Coroplast and check it...

Which flatbed printer do you have ?

I recommend an Epson S80. One of the nicest features is the huge color gamut with Red and Orange inks. The white is perfect too because when you’re not running white for a few weeks you change it over to 9 color and a cleaning fluid in the white spot. Simple- takes a few minutes and then you...

Which dealer did you buy the Roland from? If they don’t have good service, you need to switch who you buy from.

I have been setting up inkjet printers for 20 years for customers. The large banner production people have gone to the OkiData H3-104 printers since it runs production at 2 linear feet per minute. While it has a setup to run double sided banner, it is much more effective to just print the files...

Give me a shout- Bruce 631-520-3074

You make a gradient of the “Spot1” color you have created in Illustrator

Replace you Hybrid HP with a true flatbed such as the Vanguard and you will have perfect prints!

You can download a free 30 day trial of Onyx from onyxgfx.com Give it a shot

Make sure take up reel TUR is set for “tension “ in CP Manager to pull the magnet away from sticking to the heated drying section

Would be a better idea to replace the printer with a reliable eco solvent printer!