Search results

We're doing Fabricated aluminum letters for the outside of a block building. The paper pattern we use can blow around in the wind while we're trying to get it on the building. So we usually mount it to a piece of coroplast and mount that on the building. The job we have now is aprox 10 ft tall...

Years ago there was someone making a catch basket for the Versacamm. The only link I have goes to a dead end Anyone know where I can get one Thanks

I have a box. Within the box, I have a reverse panel. The reverse panel touches the 2 outside edges and the bottom. When I cut it, I get double cut lines on the 3 sides. I'm sure it has something to do with the compound feature, but I can't get it to work. Anyone know how to do it Thanks

Anyone know the support phone number for Flexi ? If I click on it from Flexi, I get a 404 page error If I click on SAI from the merchant member page here, I get a totally different page. Looks like some type of russian or greek splash screen. It eventually goes to a Microsoft web server page...

18 years in the business and have only done 3 sets of channel letters Just shows my type of client base I have a need to do a set of letters. Anyone ever use Sign Fab.com. They sent an impressive catalog. But that could just be a good marketing company. Any comments about them... Anyone use...

I have the new 360 for almost a year. i've had the same constant problem of the material getting jammed as it goes into the curing station. It dose'nt happen all the time, but when it does, I lose prints and at one time it damaged a print head. So, before the warranty runs out, should I call...

Looking to do a 30'x 9' sheet rock wall with a mural. Is Photo tex the material I should consider using or is there something better. I expect to print all the way to the edge. Should I laminate it Finally, any idea of pricing. I assume square ft and I'll add in my installation Any comments

Been asked to quote prints on 90# matte finish posters Not sure what 90# is. My supplier keeps telling me his stuff is 8 mil or 10 mil or 17mil How do I know how thick 90# is ? I'm not even sure if it's supposed to be paper. Maybe they want foam board or pvc The customer is a bakery and is...

I printed a sample of Pos Pro 200 on the 360. The leading edge curled up when it came out of the heater. Wasn't too bad but after it laying on the table overnight, the entire print was curled liked a pretzel making it unusable. I printed it on the Versacamm, but I want to fade out using this...

Does anyone know where to buy a small amount of optically clear double sided tape ? I don't see it in Fellers and my local supplier doesn't have it Thanks

I'm looking for the Truck Frame Banner system. The type where you attach a frame all around the outside of the truck and then slide in the banner into the frame. Going to use it on a building, but I don't think that matters. I need a vendor that can do it. They also need to print the banner...

I'm trying to print reverse on Oracal 290 laminate. i can't find a profile made for it. I've tried a few stock ones, but I'm just wasting material. I'm struggling to just figure out how to print on it since it's translucent, but I'm getting there. I'm not clear on how to make it's own profile...

Anyone know these 2 fonts Don't think I ever saw either one Thanks

I mentioned here that I had 4 sprinters that all the vinyl in the channels lifted after about 2 months I used Avery from a recommendation. I have 2 more to do A couple here said to use 3m... (something), but I can't find the thread. Does anyone know what it is. It was supposed to work well in...

Need to hang a 4 x 4 plexi sign from the ceiling ( sounds pretty heavy) Customer is asking for no holes. Anyone have any suggestions for hanging this with some type of concealed method Thanks

First time sending a tile job to my new HP 360. I always used versaworks and Versacam. Seemed simple. I'm printing a wrap for 2 sides of a truck. In production manager, I can tile the image to 5 panels. The last one is just 15" wide. I have 2 sides to do, so that will leave me with 2 - 15"...

Ok, may be a stupid question but, My new 360 says the cyan ink is running low and I believe it. Question is... will it stop when it's fully out and tell me to change it or will it just run out and I won't know it until the color is gone. I guess I'm used to my Roland

Years ago I had a little batch program that figured square footage. You put in height and width in inches and it told you the square footage. It only ran in early windows and has long been lost. It's easy when you need 24" x 24' but it's a little more difficult when it's 23" x 42" My girl...

Anyone know of a bright yellow banner material that I can print black onto with my 360 latex machine I guess I could print the yellow, but I thought just printing the black would be better I thought I could print onto any uncoated material, tried it, didn't go so well

When I send a job to production mgr, it creates 2 files. A print file for the 360 and a cut file for the Graphtec. When I send the cut file, it deletes it from production mgr immediately after sending it. How do I stop it from deleting it. I know there is a preference setting somewhere, but I...