Search results

Premiercolour is right, i got some aftermarket, aftermarket, crap from China, rubber was cock stiff whippers were stiff too, I let it soak in oil of winter green and alcohol concoction for a week, rubber came nice and soft they seam to work ok, but i keep a hawk eye on them Go see your local...

Them manifold's are easy to break, i break them all the time, Could also be sucking air, i have had damper that did not seal perfect, so you could not get ink to the heads

Hello everyone I picked up a ES 2000- Spectrophotometer, to use with versa works 5, I been messing around with this all week, with no success, I can calibrate the unit fine, but when i try to scan a color i keep getting Error 4087 I have tried to pint the chart 110% 120% 130% and still nothing...

I can help you out no problem ;-)

I took a look at them 2 sites and there are awesome lots of nice stuff, hard to decide what to print THANKS :)

Hi there Would anyone have a super bright full of colours cool looking high resolution picture I can use to do some testing?? I did do the test paterns that roland has I just like a nice picture with bright colors Thanks Biggs

What is this quick tool you speak of ??

Hello there Might be a dumb question but i am looking on getting a used efi i1 Pro ES 2000 spectrophotometer I just want to make 100% sure it will work with Versaworks 5 I might be blind but I don't see it listed in the measurement instrument list Thanks Biggs

Thanks :) I will post Pictures when i am done the paint etc.. Thinking of also putting on a set of chrome wheels :p:p

Yap i also put one in inside the hole at the other end were you manually clean the heads Its dark in there :p

Oh my i did not expect a argument hehe I would Quote a few people but there is to many hehe One got exactly what i am trying to do, I do a test print and all the print heads have plugged up nozzles I wanted to see what one or 2 or 3 heads is causing my problem, I will try to do the test in...

Hi there everyone i am trying to do a few test prints of 4 squares C M Y K and its pretty clear that is not 100% Yellow and the other colors are not 100% also I export my file from corel as a eps and use the default settings, open in versaworks and print I sure i am doing something wrong or...

Hello everyone I am just curious to see, i searched and could not find a answer At the beginning of each run ( i use CustonCut ) it waist about 3 inch of media I move the media back with the keys on the control pane to set base point then it stops it seams to me it has a set distance for that...

I wonder what is the less you need plugged in for it to turn on just the screen show a bit of life ??? i only have one of the 4 heads plugged in, i tried to have just the screen and power plugged in and still nothing

Don't tell me that, you changed main board and the same thing happen ???

Hi Thanks for your help, I have the service manual, i can send it to you I looked at it real quick but did not find anything Thanks

Hi Everyone I have a VP-540 that was working fine and one day decided not to turn on, I checked all the fuses and they are fine, power supply is punting out 40V the led on all other board are on but no the ones on the servo board. I checked the voltage on the L4960 Voltage regulator, input is...

Good Morning I been messing around with this the last little while, all i can fin is under the print preview you can click on adjust, then you can print a pattern and adjust each color witch works well but you have to do it every time for every job with becomes a pain This morning i printed...

Hello All Anyone know if there is a way to calibrate or align the machine for when it comes for the next color ?? It looks like my machine is off by about 0.025" and it looks like it shifts about 0.025" for every color The more spot colors you have the more it gets shifted to the left Any...

Thanks for taking the time to help me out, unfortunately my file is 153mb