Search results

over the weekend had a power failure and came in today vp540 was off started up and printed a few sheets then it stopped printing magenta changed the cart because it was registering empty on the printer status still not working did 2 powerful cleanings checked the old threads didn't see anything...

having an error with our sp300 reading the material apparently it is a wire/cable card that needs to be replaced the tech said it's about an hour for the job and he wants to charge $295 + part i don't think porsche machanics get paid that much am i off base here, is that the going rate?

having an issue with the machine reading the width of material and this is what the service tech from where we bought the machine said "Its time to replace the white cable card that reads the width is wearing out just give me a call to schedule a service" anyone ever have this problem: when...

have a problem with my sp 300 sometimes when i load the material it comes up 0.0 as the width of material and i have to shut off the machine and restart sometimes a few times anyone ever have this problem

i have been having some issues printing on 10mil pvc and the tech was here fixing something else and i asked him about this problem and he said it is a static issue and i can get a band or a bungee cord type thing that goes on the back over the roll of material to reduce the static we have a...

not a good day first my vp540 is printing a shadow (posted a thread earlier with no response as of yet) and now my sp300v is not printing yellow i put a new cartrigde in and did 2 powerfull cleanings and still my test print comes out with little or no yellow it actually looks like the magenta...

i am printing on 10mil pvc and i have attached pics but i am getting a shadow or a hazing on my vp540 i have printed this material before no problems and i did a full cleaning (took covers off, cleaned print heads, changed wipers and so on..) and then a powerfull cleaning still the same tried...

sp300 when i cut i get a skipping in some of the cuts or a stuttering almost like some of the cut lines are perferated but not the case changed the blade also tried slowing the machine down that helped i cheched some other threads didn't see anything can anyone help

anyone cut magnetic on their versa camm i have a sp300 and 540vp i have to cut magnetic decals i usually die cut them but i only need a few pieces just want to ask before i ruin the machine

my gerber edge ahs a line that runs through all my prints down the middle of the 15" width about .008"-.010" thick not much but enough to ruin your decals print head bad right? can i fix it or is it a tech job?

went to inspect a job site i am quoting rplacing some back lit signage and i have done this in the past and i just take apart the frame and slide in the new panel but this time i took apart the sign and it doesn't come apart seems like it might have been welded or put together when the orig...

versa camm sp300v ran a job about 10 sheets 5 large decals on each laminated and cut relized afeter the blade was not deep enough (i know test cut i screwed up) but went back to cut again and they are not lining up if the cutter is supposed to go by the markes shouldn't it cut the same every...