• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. JV3 160s height adjuster question

    I agree. I would check to see if you can get the right part before you start drilling holes into the carriage. Peanut

  3. I feel like I get electrocuted everytime i run composite aluminum through laminator

    Pardon my previous joke...but seriously we have the same problem. I have found that typically if I touch the panel and something metal on the frame of the laminator the whole time it is running through the printer it will dissipate the static electricity through the ground on the machine. When...

  4. I feel like I get electrocuted everytime i run composite aluminum through laminator

    Have someone else touch it first...lol

  5. JV3 160s height adjuster question

    I am not sure by what you mean the screws holes are not in the right place. Are they slightly off or not even close? Are there holes in a different place. If there are holes in a different place, then you might not have received the proper part. I would be very careful about where I drill...

  6. JV3 160s height adjuster question

    Hope these pics help. If you need more, let me know and I will try to get better ones. Peanut

  7. New vinyl cutter suggestions?

    +1

  8. Please Help

    ha ha ha ha
  9.

    Font Help Please!

    Looks like Roadgeek 2005 Series C or D

  10. Please Help

    no image.

  11. Short Rolls!?

    We have had several rolls over the year shorted. We always mention to the distributor. Usually they knock a little money off or send us some extra material free. Once even got a whole extra 30 yd roll for free.

  12. How many employees do you have / How long have you been in the business?

    3-5 employees depending on time of the year. College town so we get guys wanting to work over the summer. Shop has been open for almost 10 years.

  13. 4'x6' Diamond (Orajet 3651) on rivet-less trailer - wet or dry?

    That is definitely not cheating. Whatever methods works for you and achieves the proper results is the way to go. Glad it worked out for you! Peanut

  14. testing material and laminate

    I'd say it sounds like it is working. I would love to see pics when you are done. I love some wall wraps!

  15. testing material and laminate

    Yeah, I got that. It was the last post about 80% thinner, etc. I think I am clear now. I am not familiar with those materials so I can't say for sure. I would think the largest piece (closer to size) you can test on the wall will give you a better example. Are you testing the piece on the...

  16. Looking for Ink Pump Assembly, or just gear..

    No problem. Hope you find someone parting one out.

  17. testing material and laminate

    Not quite sure what you were asking in the past post.

  18. testing material and laminate

    I would tend to agree with Chris. A bigger piece would most likely absorb/be effected by humidity, temp and other factors.

  19. Looking for Ink Pump Assembly, or just gear..

    Yep can't help you with that. Sorry. Have you checked digiprint supplies or cmyk parts to see if you could order just the gear part? I am still fairly new to signs101, so there might even be a merchant member who carries that part.

  20. Looking for Ink Pump Assembly, or just gear..

    Here is a picture of it. I have three of them. You can have one for $15 plus the shipping or you can have all three for $35 plus the shipping. Just let me know.

  21. Looking for Ink Pump Assembly, or just gear..

    If it is the same gear as the outdoor junior (transmission gear) I have a couple of them. I will upload a pic in a minute of one. Peanut
Top