Search results

Looks like a media issue. Ran some wall vinyl on it and it printed great. What's everyone's experience dealing with getting replacements on vinyl? The vinyl was bought from Grimco.

I thought it could be a plasticizer issue. I wiped down the media with alcohol, but no change.

The profile started off as the .icc from Orafol. I'd assume optimizer is set between 18-22%, which I believe is the recommended amount. Or are you saying the optimizer printhead is bad?

They expired about a month ago. I'll give them a shake and see what happens.

What is the most likely culprit of blotchy prints (see attached)? This is a fresh calibration. Inks or printheads? Printheads were installed about 6 weeks ago and this is probably the 3rd or 4th print on them. Inks are expired, but have not been used much; I still have about 600 mL left in each...

Use the media locator Link Here I use the same profile that I use for the white vinyl equivalent.

My comment was 315 specific. HP documentation requires 2 poles, 30 mA residual, at least 20 A capacity. Max load printing is 3 A and for curing is 13 A.

That isn't correct. You need two outlets on a 20 amp circuit. I have had a 315 for 5 or 6 years and have been running it off a single 20 amp circuit.

I've had a 315 for a while and use a i1pro2 to create my own profiles in Flexi. Yes, the colors shift over time and you'll need to reprofile regularly, but it's the only way to be as consistent as you can be.

No. Flexi does have some type of cloud interface though, not sure if that is relevant.

Just figured it out. Apparently, Flexi only works with certain ports. Port 8080 was what was selected, but I kept seeing something about port 9100 and when I spoke with HP support, they said something about port 9100. Just randomly, I switched the port on the printer and RIP and sent a job and...

Are there any rips that don't require Windows 10 or newer. I'm running Windows 7 Ultimate.

Just attempted on a second computer with the same result. So, it's got to be a printer issue then?

Okay, looks like RipCenter does not have custom ICC profiling. Postershop and Thrive do.

When I run connectivity troubleshooting, everything passes with the exception of Email server configuration settings. No idea what that is for or why I would need it.

What's the difference between Thrive and RipCenter? Seems like RipCenter has everything anyone would need to print.

New update. Uninstalled Flexi and then reinstalled in. Added my printer back in and still getting the same result. The computer is definitely communicating with the printer as I can wake up the printer from Chrome. Flexi polls media size and will sync media. I have tried Cat5e ethernet cables...

Unfortunately, no other computer to try it on. I guess I'll try uninstalling the program and reinstalling.

New issue just started. FlexiPrint version 12 w/ HP Latex 315. When I send a job, it processes through RIP and Output just like it normally does, but the printer never prints anything. I went through HP tech support and they could not find any problems. The printer is accessible through the IP...